Cable Leader 8ft IEC C20 to C13 14 AWG 15A/250V Red Power Extension Cord

Extension cord for C20-to-C13 power links

The Cable Leader 8 ft IEC C20 to C13 cord adds reach between a rack PDU, UPS or server and an existing C13 cable. It carries a male C20 plug on one end and a female C13 socket on the other, so no adapter is required. The 14 AWG SJT jacketed cable uses three grounded copper conductors rated 15A at 250V with a 105C / 300V insulation rating. It is UL Listed and CSA certified under file E210037 and meets RoHS requirements.

Suits rack builds that need colour-coded circuit

The red jacket helps technicians identify phases or circuits at a glance inside a dense rack. Builders running servers, switches or AV gear on standard IEC 60320 C20/C13 connections will find the 15A capacity appropriate for typical loads. Buyers who need a higher current path for 20A equipment should look at a 12 AWG alternative. Anyone whose power source or device uses a different connector family will need a different cable.

Plug-in installation with no tools required

Connect the male C20 plug into the PDU or UPS outlet and insert the existing C13 cord into the female end; the connection locks by friction. The SJT jacket is flexible enough for tight cable management but stiff enough to hold its shape in vertical runs. The most common issue is accidentally ordering the wrong gender or length for the rack layout, so verify the C20 source and C13 load before purchasing.