We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved SATA to dual 3-pin 4-pin fan splitter cable, 10 inches

Vszerda

Vszerda SATA to 2x 3pin 4pin fan power splitter cable 10 inch black

SKU CH-5W4E-HN0E8

Splits one SATA 15-pin connector into two 3-pin or 4-pin fan headers with a 10-inch sleeved cable, powered directly from the PSU without PWM speed control

Style PWM 1x5

  • Powers two fans from one SATA connector
  • 10 inch sleeved cable fits tight builds
  • 22 AWG copper cores deliver steady 12 V supply
  • 15 pin male plugs straight into PSU
  • No PWM control — fans run at full speed

SATA-powered fan splitter for case cooling

This cable draws 12 V power from a PSU SATA connector and splits it to two 3-pin or 4-pin fan headers. It is intended for builders who need to run additional case fans from a spare SATA power lead. The black sleeved jacket protects the 22 AWG copper wires along the 10 inch length.

Two energised pins mean fans run at full speed

Only two pins on each fan connector carry power, so PWM speed control and tachometer feedback are not available. Connected fans will spin at 100 % duty cycle whenever the supply is live. The 15-pin SATA plug mates with standard modular or fixed PSU cables, while the two female fan sockets accept common 3-pin or 4-pin headers.

No PWM control — only constant 12 V operation

The single specification that decides suitability is the lack of PWM wiring: the adapter cannot throttle fan speed or report RPM. Buyers who need variable fan curves or motherboard monitoring should look elsewhere. This splitter suits setups where fixed maximum airflow is acceptable.

Highlights

  • Powers two fans from one SATA connector
  • 10 inch sleeved cable fits tight builds
  • 22 AWG copper cores deliver steady 12 V supply
  • 15 pin male plugs straight into PSU
  • No PWM control — fans run at full speed

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the 15-pin SATA power connector actually deliver to the two fan headers?

The 15-pin SATA plug supplies 12 V from the PSU, but only two pins on each 3-pin or 4-pin fan header are energised, so speed control and PWM signalling are not available.

How much clearance does the 10-inch sleeved cable need behind the motherboard tray?

The black-sleeved assembly measures 10 inches end-to-end with 22 AWG UL 1007 copper conductors, so allow at least that length plus connector depth for routing.

Which step do builders often miss when plugging the splitter into the power supply?

Connect the SATA 15-pin male end to a free PSU SATA power lead first, then attach up to two fans to the female headers; reversing the order can bend the delicate 22 AWG pins.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.