We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved Molex-to-four-fan splitter cable 10 inches long

Vszerda

Vszerda Molex to 4×3/4-pin Fan Splitter 10 inch Black

SKU CH-VH19-RZKE0

Powers up to four 3-pin or 4-pin case fans from a single 12 V Molex connector using a 10 inch black-sleeved 22 AWG cable

Style PWM 1x5

  • Powers four fans from one Molex connector
  • 10 inch black sleeved cable keeps routing tidy
  • 22 AWG copper conductors deliver reliable 12 V supply
  • Two energised pins per header run fans at full speed
  • LP4 male to four female fan headers for simple installation

Molex-to-fan splitter for up to four fans

This 10-inch adapter converts a single PSU Molex connector into four 3-pin or 4-pin fan headers. It is built for PC builders who want to run multiple case fans from one power supply output. The black sleeved jacket uses standard UL 1007 22AWG copper wire.

Sleeved cable and fixed 12 V supply

The black sleeving protects the 100% copper cores while routing inside a chassis. Because the cable draws power directly from the PSU Molex interface, all connected fans receive a constant 12 V. Only two pins per header are energised, so the PWM wire remains inactive.

No PWM control or speed throttling

The adapter cannot regulate fan speed or respond to motherboard PWM signals. Every attached cooler runs at full voltage continuously. Builders who need variable speed curves or automatic thermal management must connect fans to motherboard headers instead.

Highlights

  • Powers four fans from one Molex connector
  • 10 inch black sleeved cable keeps routing tidy
  • 22 AWG copper conductors deliver reliable 12 V supply
  • Two energised pins per header run fans at full speed
  • LP4 male to four female fan headers for simple installation

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the Molex connectors on this splitter need replacing over time?

The LP4 male connector and four female fan headers are standard parts; no scheduled replacement is mentioned for the 22 AWG copper-core cable.

What limits how many fans I can run continuously from the single Molex lead?

The cable is rated for 12 V and uses 22 AWG wire, so the PSU Molex rail's current limit is reached before the splitter itself becomes a bottleneck.

Does the black-sleeved jacket add noticeable heat or noise when all four fans run all day?

The sleeve is passive insulation; the adapter has no active electronics, so it adds no fan noise and negligible thermal resistance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.