We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved cable with SATA plug splitting to two fan connectors

Vszerda

Vszerda SATA to 2x 3/4-pin fan splitter cable 10 inch black

SKU CH-M7QE-PVYGW

Connects two 3-pin or 4-pin case fans to a 15-pin SATA power plug with a 10-inch black sleeved cable

Style PWM 1 x2

  • Power two fans from one SATA connector
  • 10-inch sleeved cable keeps wiring tidy
  • 12 V supply via standard 15-pin SATA plug
  • 22 AWG copper cores rated UL 1007
  • PWM control not supported — fans run at fixed speed

Vszerda SATA fan splitter cable

This Vszerda adapter connects two 3-pin or 4-pin case fans to a single SATA power connector from the PSU. It is intended for builders who want to add extra cooling without using motherboard fan headers. The 10 inch black sleeved cable keeps the installation tidy inside the case.

Thermals noise and power delivery

Power comes directly from the PSU SATA interface at 12V so the fans run at full speed continuously. Only two pins are energised on each fan connector which means PWM control and speed throttling are not available. The 22AWG copper conductors handle the current for up to two fans without voltage drop.

No PWM speed control

The single specification that decides fit is the lack of PWM functionality; the cable cannot throttle fan speed or report RPM to the motherboard. Buyers who need automatic fan curves or quiet low-speed operation should look for a motherboard-header splitter instead.

Highlights

  • Power two fans from one SATA connector
  • 10-inch sleeved cable keeps wiring tidy
  • 12 V supply via standard 15-pin SATA plug
  • 22 AWG copper cores rated UL 1007
  • PWM control not supported — fans run at fixed speed

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I connect the SATA 15-pin male plug to my PSU and avoid the common mistake of expecting PWM speed control?

Plug the SATA 15-pin male connector into any free SATA power port on the PSU. The cable only energises two pins on each fan header, so PWM speed control and throttling are not possible; fans will run at full 12 V constantly.

Will the black sleeved jacket or the 22 AWG copper wires need replacement after long-term use inside a case?

The UL 1007 22 AWG copper conductors and black sleeved jacket are rated for continuous 12 V operation and do not have a scheduled replacement interval; inspect visually during routine cleaning and replace only if insulation damage or connector wear appears.

What is the practical limit when running two fans continuously from this 10-inch splitter?

The SATA power connector and 22 AWG wires set the current ceiling; with only two pins energised per header, sustained 12 V delivery to both fans is the limiting factor, not cable length or PWM circuitry.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.