We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved Molex LP4 male to four fan female connectors 10 inch cable

Vszerda

Vszerda Molex LP4 to 4× TX3/TX4 PWM fan splitter 10 inch black

SKU CH-5F7W-THE74

A 10 inch Molex LP4 splitter powers up to four 3-pin or 4-pin fans from a PSU, though only two pins are energised so PWM control is not available

Style PWM 1x4

  • Powers four fans from one Molex connector
  • 10-inch black sleeved cable keeps routing tidy
  • 22 AWG copper cores deliver reliable 12 V supply
  • Two energised pins per header run fans at full speed
  • Standard UL 1007 wiring meets basic safety specs

Molex LP4 to four PWM fan splitter

This 10 inch adapter converts a single PSU Molex LP4 connector into four 3-pin or 4-pin fan headers. It is designed for builders who need to run multiple case coolers from one power supply output. The black sleeved jacket uses standard UL 1007 22AWG copper wire.

Power delivery limited to two energised pins

Each fan header receives only 12 V power and ground; the tachometer and PWM control pins are not connected. Fan speed cannot be regulated by the motherboard and all attached fans run at full voltage continuously. The splitter supports up to four fans simultaneously within the PSU rail limits.

No PWM or speed control capability

The product cannot throttle fan speed or provide PWM control because only two pins are energised. Buyers who need motherboard-managed fan curves or RPM monitoring should not use this cable. It suits setups where constant 12 V operation is acceptable.

Highlights

  • Powers four fans from one Molex connector
  • 10-inch black sleeved cable keeps routing tidy
  • 22 AWG copper cores deliver reliable 12 V supply
  • Two energised pins per header run fans at full speed
  • Standard UL 1007 wiring meets basic safety specs

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick this 10-inch splitter or a longer cable for my case?

The 10-inch length suits compact builds where fans sit near the PSU; choose a longer cable only if your fan headers are farther from the Molex connector.

What does the 12 V Molex rating mean once the cable is installed?

All four fan connectors draw 12 V directly from the PSU Molex rail, so every attached fan runs at full speed continuously.

How does the TX3/TX4 interface limit PWM control in practice?

Only two pins per fan header are energised, so the PWM signal wire is absent and fan speed cannot be regulated by the motherboard.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.