We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five carbide down-cut end mills, 1/8 inch shank, matte grey finish

SPEED TIGER

SPEED TIGER ISED1-8-2 Carbide Down Cut End Mills 1/8" 5 pcs

SKU CH-TZ0D-GCXAS MPN ISED1-8-2

Five-piece carbide down-cut end mill set with 1/8 inch diameter and 1/2 inch cutting length for wood, aluminium, MDF and steels up to HRC45

  • TypeEnd Mills
  • Size/Dimensions1/8 In
  • MaterialCarbide
  • Compatibility/FitmentISED
  • Selling Unit5

Option 1/8 In

Class 5 Packs

  • Down-cut geometry gives clean top edges on wood and composites
  • Micro-grain carbide resists wear in steels up to HRC 45 and cast iron
  • 1/8" shank and 2" overall length fit standard collets directly
  • Five-piece pack covers multiple jobs without reordering
  • ISO-9001 factory grinding ensures consistent flute quality

Precision milling set

The SPEED TIGER ISED1-8-2 set contains five carbide down-cut end mills with a 1/8 inch cutting diameter, 1/2 inch cutting length and 2 inch overall length. They are intended for CNC operators and woodworkers who need clean top-surface finishes on wood, MDF, oak, aluminium and steels up to HRC45.

Setup and breakage risks

Correct spindle speed and feed rate are essential; the supplier advises contacting the seller for cutting-condition data before first use. Down-cut geometry pushes chips downward, so evacuation can be poor in deep slots and may cause heat build-up or tool breakage if parameters are not matched to the material.

Sustained cutting behaviour

Micro-grain carbide resists wear during extended passes in carbon steels around HB225, alloy steels up to HB325 and pre-hardened steels up to HRC45. The down-cut action keeps the upper surface clean throughout long profiles, though chip packing in confined pockets can raise cutting temperatures over time.

Highlights

  • Down-cut geometry gives clean top edges on wood and composites
  • Micro-grain carbide resists wear in steels up to HRC 45 and cast iron
  • 1/8" shank and 2" overall length fit standard collets directly
  • Five-piece pack covers multiple jobs without reordering
  • ISO-9001 factory grinding ensures consistent flute quality

Specifications

BrandSpeed Tiger
ModelISED1-8-2 -5pcs
TypeEnd Mills
Size/Dimensions1/8 In
MaterialCarbide
Compatibility/FitmentISED
Selling Unit5

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I confirm the carbide end mills are cutting correctly after installation?

Run a test cut in your material and check for clean edges without tear-out; the down-cut geometry should push chips downward and leave a smooth top surface.

What comes in the package and do I need any additional accessories?

The box contains five 1/8″ carbide down-cut end mills with 1/2″ cutting length and 2″ overall length; no extra items are included.

Which version should I choose for cutting aluminium versus harder steels?

The same ISED1-8-2 cutters handle aluminium, copper, MDF, carbon steels up to 225 HB, alloy steels 225–325 HB and pre-hardened or hardened steels up to 45 HRC.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.