We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Solid carbide down-cut end mill, half-inch shank, grey finish

SPEED TIGER

SPEED TIGER ISED1-2-2 Carbide Down Cut End Mill 1/2" pneumatic accessory

SKU CH-5R0V-QB497 MPN ISED1-2-2

A carbide down-cut end mill with 1/2" diameter for wood, aluminium, MDF and steels up to HRC45

  • TypeEnd Mills
  • Size/Dimensions1/2 In
  • MaterialCarbide
  • Compatibility/FitmentISED
  • Selling Unit1

Option 1/2 In

Class 1 Pack

  • Cuts wood, aluminum, copper, MDF and steels up to HRC45
  • Micro-grain carbide resists wear for long tool life
  • Down-cut geometry produces clean top surfaces on workpieces
  • Ground in ISO-9001 factory ensuring consistent quality
  • Seller provides cutting-condition data to optimise performance

Precision Carbide End Mill

The Speed Tiger ISED1-2-2 is a 1/2 inch diameter solid carbide down-cut end mill designed for CNC routing and milling. It suits machinists and fabricators who need clean top-surface finishes on wood, MDF, aluminium, copper, carbon steels up to HB225, alloy steels up to HB325, pre-hardened steels up to HRC45, hardened steels HRC40-45 and cast iron.

Spindle Compatibility Check

Verify that your machine can deliver the correct spindle speed and feed rate for a 1/2 inch carbide cutter with 1-1/4 inch cutting length. The shank diameter matches the cutting diameter at 1/2 inch, so confirm your collet or holder accepts this size. Contact the seller for cutting condition data before first use to avoid tool breakage.

Micro-Grain Carbide Construction

The cutter is ground from micro-grain carbide in an ISO-9001 certified factory, giving high wear resistance and toughness for the listed material range. Down-cut geometry pushes chips downward, holding the workpiece flat and reducing tear-out on the upper face during through-cuts or pocketing operations.

Highlights

  • Cuts wood, aluminum, copper, MDF and steels up to HRC45
  • Micro-grain carbide resists wear for long tool life
  • Down-cut geometry produces clean top surfaces on workpieces
  • Ground in ISO-9001 factory ensuring consistent quality
  • Seller provides cutting-condition data to optimise performance

Specifications

BrandSpeed Tiger
ModelISED1-2-2
TypeEnd Mills
Size/Dimensions1/2 In
MaterialCarbide
Compatibility/FitmentISED
Selling Unit1

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What is included in the package and what else do I need to buy?

The box contains one carbide down-cut end mill with a 1/2" cutting diameter, 1-1/4" cutting length, 1/2" shank and 3" overall length. You must supply a compatible router or milling machine, collet or tool holder, and determine the correct spindle speed and feed rate for your material.

Which version of this end mill should I choose for my material?

This single model is designed for general application across wood, oak, MDF, aluminum, copper, carbon steels up to 225 Brinell, alloy steels 225 to 325 Brinell, pre-hardened steels up to 45 HRC, hardened steels 40 to 45 HRC and cast iron. Select it when you need a down-cut geometry for clean top surfaces on these materials.

What does the down-cut geometry actually do when the tool is running in my machine?

The down-cut spiral forces chips downward, leaving a cleaner top edge on through-cuts and reducing splintering on laminated or veneered sheets. It also helps hold thin workpieces flat against the table, but requires effective dust extraction because chips are not lifted clear of the cut.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.