Nippon Labs SATA-1RR-10P SATA cable 1 m right angle 10 pack
- SATA II
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Nippon Labs
A 1 metre red SATA II cable with two right-angle connectors supports 3.0 Gbps transfer rates and hot-swap capability
This red 1-metre cable carries two shielded 26 AWG conductors and supports SATA I and SATA II devices at up to 3.0 Gbps. Both ends use right-angle 7-pin plugs so the cable hugs the motherboard and drive without protruding. The narrow profile eases routing and leaves more room for airflow inside the case. It is a new component ready for immediate installation.
The right-angle plugs let you connect drives that sit flush against a case wall or sit behind long graphics cards where straight connectors would not clear. Shielded 26 AWG wiring resists interference from nearby power cables. Hot-swap capability means you can attach or remove a drive without powering down the system, useful for test benches or removable drive trays. No extra adapters or brackets are required.
Builders replacing wide parallel ATA ribbons or stiff first-generation SATA cables gain cleaner cable management and better cooling paths. The jump is worth it when the current cable blocks a fan, kinks sharply at the connector or lacks the 3.0 Gbps rating needed for a SATA II SSD or hard drive. It does not serve SATA III 6 Gbps devices at their full speed, so newer 6 Gbps drives should use a cable rated for that standard.
| Brand | Nippon Labs |
|---|---|
| Model | SATA-1RR |
| Type | SATA II |
| Color | Red |
| Length | 1M (3.28 ft.) |
| Cable Length | 3.28 ft. (1m) |
| Connector Number | 2 |
| Features | 1 Meter (3.28 ft.) 2 shielded 26 AWG SATA II cable- 2 right angle 7 Pins connectors 3GB Maximum transfer rate Hot-swap capability high-speed Serial ATA and Serial ATA II devices to a Serial ATA controller Support data transfer rates of up to 3.0 Gbps. Narrow cables design: 1) simplifies cable routing and installation 2) improves air flow within CPU (no more big ribbons blocking air movement) |
| Shipping weight | 0.04 kg |
| Package size | 114 × 81 × 19 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The cable supports data transfer rates of up to 3.0 Gbps for SATA II devices.
As a passive shielded cable it produces no noise and negligible heat during all-day use.
You need a SATA controller or motherboard with a 7-pin port and a SATA I or SATA II drive.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?