Nippon Labs SATA-1RR SATA cable 1m 3.28 ft right angle 2 connectors red SATA II 26 AWG
- SATA II
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Nippon Labs
A 100-pack of 1-metre red SATA II cables with right-angle connectors, shielded 26 AWG wiring and 3.0 Gbps transfer rates
Style 100 Packs
This 100-pack supplies one-metre SATA II cables with two right-angle 7-pin connectors on each lead. The red 26 AWG shielded cables are rated for 3.0 Gbps transfer rates and support hot-swap operation. They connect Serial ATA and Serial ATA II drives to a Serial ATA controller in high-volume deployments.
The slim cable profile simplifies routing inside crowded chassis and reduces obstruction of internal air movement. Each cable terminates in right-angle connectors at both ends, which helps align drives in tight drive bays or against backplanes without sharp bends. Shielding on the 26 AWG conductors protects signal integrity at the rated 3.0 Gbps speed.
Verify that the 1 metre length reaches between your drive locations and the host controller without tension. Confirm that right-angle connectors suit the orientation of both the drive and motherboard or backplane ports. Ensure the system uses SATA or eSATA interfaces, as these cables do not support other bus types.
| Brand | Nippon Labs |
|---|---|
| Model | SATA-1RR-100P |
| Type | SATA II |
| Color | Red |
| Length | 1M (3.28 ft.) |
| Cable Length | 3.28 ft. (1m) |
| Connector Number | 2 |
| Features | 1 Meter (3.28 ft.) 2 shielded 26 AWG SATA II cable- 2 right angle 7 Pins connectors 3GB Maximum transfer rate Hot-swap capability high-speed Serial ATA and Serial ATA II devices to a Serial ATA controller Support data transfer rates of up to 3.0 Gbps. Narrow cables design: 1) simplifies cable routing and installation 2) improves air flow within CPU (no more big ribbons blocking air movement) |
| Shipping weight | 4.54 kg |
| Package size | 406 × 254 × 127 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The 26 AWG shielded conductors are rated for the 3.0 Gbps SATA II specification and have no scheduled replacement interval.
The cable supports data rates up to 3.0 Gbps, so the SATA II interface itself is the limiting factor.
The passive 26 AWG shielded cable carries only signal current, so it produces no measurable heat and consumes no additional power during continuous operation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?