Nippon Labs SATA-1RR SATA cable 1m 3.28 ft right angle 2 connectors red SATA II 26 AWG
- SATA II
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Nippon Labs
Ten 1-metre SATA II cables with dual right-angle connectors, shielded 26 AWG wiring and 3.0 Gbps transfer support
Style 10 Packs
This 10-pack supplies ten red SATA cables each measuring 1 m (3.28 ft.) with right-angle 7-pin connectors on both ends. The shielded 26 AWG conductors support SATA II operation up to 3.0 Gbps and hot-swap capability. Builders wiring multiple drives in a single chassis can use the bundle to keep routing consistent across all bays.
The right-angle plugs fit tight drive bays where straight connectors press against side panels or adjacent cards. The narrow cable profile reduces clutter and improves airflow compared with older ribbon-style leads. The upgrade is worth it when a straight connector blocks a neighbouring slot or when cable bulk restricts cooling in a densely populated case.
Verify that each target drive and motherboard port accepts a right-angle plug without mechanical interference. Confirm the host controller operates at SATA II 3.0 Gbps so the cable’s rated speed is fully utilised. Ensure the 1 m length reaches from the controller to the furthest drive bay without strain.
| Brand | Nippon Labs |
|---|---|
| Model | SATA-1RR-10P |
| Type | SATA II |
| Color | Red |
| Length | 1M (3.28 ft.) |
| Cable Length | 3.28 ft. (1m) |
| Connector Number | 2 |
| Features | 1 Meter (3.28 ft.) 2 shielded 26 AWG SATA II cable- 2 right angle 7 Pins connectors 3GB Maximum transfer rate Hot-swap capability high-speed Serial ATA and Serial ATA II devices to a Serial ATA controller Support data transfer rates of up to 3.0 Gbps. Narrow cables design: 1) simplifies cable routing and installation 2) improves air flow within CPU (no more big ribbons blocking air movement) |
| Shipping weight | 0.45 kg |
| Package size | 254 × 152 × 76 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The 1 m length and right-angle 7-pin connectors allow routing close to the drive and motherboard, while the narrow 26 AWG cable improves airflow in compact cases.
Insert each 7-pin connector straight into the SATA port until the metal latch clicks; forcing it at an angle can bend the pins.
Replace the cables if sustained throughput falls well below the 3.0 Gbps rating or if the latch no longer holds the connector securely.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?