We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bundle of fifty red SATA cables with right-angle connectors

Nippon Labs

Nippon Labs SATA-1RR-50P sata cable 1M 2 right angle 50 pack

SKU CH-BDGV-NYF48 MPN SATA-1RR-50P

Pack of 50 one-metre red SATA II cables with dual right-angle connectors, 26 AWG shielding and 3.0 Gbps transfer rate

  • TypeSATA II
  • ColorRed
  • Length1M (3.28 ft.)
  • Cable Length3.28 ft. (1m)
  • Connector Number2
  • Features1 Meter (3.28 ft.) 2 shielded 26 AWG SATA II cable- 2 right

Style 50 Packs

  • Right-angle connectors simplify tight drive-bay routing
  • Shielded 26 AWG conductors support 3.0 Gbps data rates
  • 1 metre length reaches across full-size chassis
  • Red colour aids quick cable identification
  • 50-pack supplies volume builds and spares

Pack contents and target use

This pack contains fifty 1-metre SATA II cables with red 26 AWG shielding. Each cable has two right-angle 7-pin connectors rated for 3.0 Gbps transfer and hot-swap operation. The bundle suits system integrators or anyone wiring multiple drives in a single build.

Installation notes

The right-angle plugs fit tight drive bays and the narrow jacket eases routing through crowded chassis. Shielded 26 AWG conductors reduce signal loss but the cables only support SATA I and SATA II speeds, so they will limit newer drives to 3.0 Gbps.

Pre-order checklist

Verify that your host controller and drives use standard 7-pin SATA ports and that a 1-metre reach matches your layout. The right-angle orientation is fixed, so confirm the connector angle suits the drive and motherboard positions before opening the pack.

Highlights

  • Right-angle connectors simplify tight drive-bay routing
  • Shielded 26 AWG conductors support 3.0 Gbps data rates
  • 1 metre length reaches across full-size chassis
  • Red colour aids quick cable identification
  • 50-pack supplies volume builds and spares

Specifications

BrandNippon Labs
ModelSATA-1RR-50P
TypeSATA II
ColorRed
Length1M (3.28 ft.)
Cable Length3.28 ft. (1m)
Connector Number2
Features1 Meter (3.28 ft.) 2 shielded 26 AWG SATA II cable- 2 right angle 7 Pins connectors
3GB Maximum transfer rate
Hot-swap capability
high-speed Serial ATA and Serial ATA II devices to a Serial ATA controller Support data transfer rates of up to 3.0 Gbps.
Narrow cables design:
1) simplifies cable routing and installation
2) improves air flow within CPU (no more big ribbons blocking air movement)
Shipping weight2.27 kg
Package size305 × 152 × 76 mm

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I verify the cable is functioning correctly after connecting it?

The system should detect the attached SATA device and transfer data at up to 3.0 Gbps.

What comes in the package and is anything else required?

Fifty red SATA II cables, each 1 metre long with two right-angle 7-pin connectors. No extra items are needed for a standard drive connection.

Which capacity or version of this pack should I select?

The product is offered only as a 50-pack of 1-metre SATA II cables with dual right-angle ends.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.