We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua blue duplex fibre patch cable with LC connectors at both ends, 3.0 mm jacket, five metres long

Enfain

Enfain OM3 LC-LC Duplex Multimode Fibre Optic Cable 5m Aqua Blue

SKU CH-ECQZ-4D9T0

A 5 m aqua duplex patch cord with OM3 multimode fibre, LC connectors, 3.0 mm jacket and 850 nm wavelength for 10 Gbit links

Length 5m

  • Supports 10 Gigabit Ethernet with OM3 multimode core
  • Low 0.2 dB typical insertion loss preserves signal quality
  • High return loss above 38 dB reduces reflection
  • 0 mm PVC jacket protects fibre in dense racks
  • Rated for 1000 mating cycles for reliable reconnections

Enfain OM3 Duplex Patch Cable

The Enfain OM3 LC-LC duplex multimode cable carries 10-gigabit signals over a 5-metre aqua-blue PVC jacket. Ceramic ferrules and an OM3 10-gigabit core support 1G, 10G and 40G links in switches, servers and data-centre racks. Typical insertion loss sits at 0.2 dB with a maximum of 0.3 dB, while return loss exceeds 38 dB. The assembly is rated for one thousand mating cycles.

Verify LC Ports and OM3 Compatibility

Confirm that both endpoints use LC duplex receptacles and accept OM3 multimode fibre at 850 nm. The 3.0 mm jacket requires a minimum bend radius of 330 mm, so plan cable routes that avoid tighter curves. Operating temperature spans minus 20 °C to plus 60 °C; ensure the installation environment stays within this range. No other connector types or fibre grades are supported by this assembly.

Suits 10G Multimode Links, Not Single-Mode

This cable serves installers building 1G, 10G or 40G multimode connections between LC-equipped gear. It does not suit single-mode infrastructure, nor links that demand a smaller bend radius or a different connector format. Buyers needing longer reach, single-mode performance or non-LC terminations should select a different product.

Highlights

  • Supports 10 Gigabit Ethernet with OM3 multimode core
  • Low 0.2 dB typical insertion loss preserves signal quality
  • High return loss above 38 dB reduces reflection
  • 0 mm PVC jacket protects fibre in dense racks
  • Rated for 1000 mating cycles for reliable reconnections

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What connectors come on this cable and do I need any adapters?

The cable is terminated with duplex LC connectors on both ends. No adapters are included; order LC-compatible transceivers or patch panels separately.

When should I choose this OM3 5 m cable over other multimode grades?

Choose this OM3 duplex patch cord for 10 Gbit/s links at 850 nm where a 3.0 mm PVC jacket and ceramic ferrules meet the installation requirements.

What does the 0.2 dB typical insertion loss mean for a live 10 Gbit/s link?

At 0.2 dB typical loss per connector pair, the cable adds minimal attenuation, keeping signal margin well within the >38 dB return-loss spec for reliable 10 Gbit/s operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.