Enfain
Enfain OM3 LC-LC Duplex Multimode Fibre Optic Cable 25m
OM3 duplex multimode patch cable with LC connectors, 25 m length, 3.0 mm jacket, 850 nm wavelength, typical insertion loss .2 dB, return loss >38 dB
- Supports 10 Gb links with OM3 10-gigabit core
- Low 0.2 dB typical insertion loss keeps signal strong
- >38 dB return loss reduces reflection in duplex runs
- 0 mm PVC jacket and 330 mm bend radius suit tight racks
- Rated for 1000 mating cycles across -20 °C to +60 °C
OM3 duplex patch cable for 10G links
This OM3 multimode duplex patch cord uses LC-LC connectors and a 3.0 mm PVC jacket. It is built for 1 Gbps, 10 Gbps and 40 Gbps Ethernet links in switches, servers and data-centre racks. The aqua jacket identifies the OM3 grade at a glance.
Low loss and wide temperature range
Typical insertion loss is 0.2 dB with a maximum of 0.3 dB, while return loss exceeds 38 dB. The cable operates from -20 °C to +60 °C and withstands 1000 mating cycles. A 330 mm minimum bend radius protects the fibre during routing.
25 metre reach at 850 nm
The 25 m length suits cross-rack or row-to-row runs at the 850 nm wavelength. Buyers who need longer OM3 distances or single-mode wavelengths should choose a different cable.
Highlights
- Supports 10 Gb links with OM3 10-gigabit core
- Low 0.2 dB typical insertion loss keeps signal strong
- >38 dB return loss reduces reflection in duplex runs
- 0 mm PVC jacket and 330 mm bend radius suit tight racks
- Rated for 1000 mating cycles across -20 °C to +60 °C
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
How do I install the LC connectors on this 25m OM3 duplex patch cord and what step is often missed?
Push each LC connector straight into the SFP or panel port until the latch clicks; the step often missed is removing the protective dust caps from both ferrule ends before insertion.
What maintenance or replacement will this 3.0mm aqua cable need after repeated use?
The ceramic ferrules are rated for 1000 insertion and removal cycles; beyond that, clean the end-faces with a fibre cleaner and inspect for scratches before deciding on replacement.
What limit appears first on this OM3 link during sustained 10G operation at 850nm?
Insertion loss of 0.2dB typical and 0.3dB maximum per connector is the first limiting factor; keep total channel loss within budget and avoid bends tighter than 330mm radius.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket








