We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fibre patch cord with LC connectors on both ends, 15 metre length

Enfain

Enfain OM3 LC-LC Duplex Multimode Fibre Optic Cable 15m Aqua Blue

SKU CH-3GQ8-G9D0Y

A 15-metre duplex multimode patch cord with LC connectors, OM3 core rated for 10 Gbit at 850 nm, 3.0 mm jacket, typical insertion loss .2 dB and return loss above 38 dB

Length 15m

  • Low insertion loss preserves signal quality with typical .2 dB and maximum .3 dB
  • High return loss above 38 dB reduces reflection in duplex LC connections
  • OM3 10-gigabit core supports 1G, 10G and 40G multimode transmission at 850 nm
  • Durable 3.0 mm PVC jacket withstands 1000 mating cycles and 330 mm bend radius
  • Wide operating range from -20 °C to 60 °C suits data centre and server environments

OM3 LC-LC Duplex Fibre Cable 15m

This OM3 multimode fibre patch cord uses LC duplex connectors at both ends and is fifteen metres long. The aqua jacket identifies the OM3 rating and the cable carries a 10-gigabit core designed for 850 nm transmission. Typical insertion loss is 0.2 dB with a maximum of 0.3 dB, and return loss exceeds 38 dB. It suits connections between switches, servers and patch panels in data-centre or campus networks.

Suitable for 10G and 40G links over OM3

The cable supports 1 Gbps, 10 Gbps and 40 Gbps multimode links where OM3 fibre is specified. Installers who need single-mode reach, higher bandwidth grades such as OM4 or OM5, or different connector types should select another product. The 3 mm PVC jacket and 330 mm minimum bend radius suit standard indoor routing but not outdoor or plenum requirements.

15-metre OM3 LC duplex length

The fifteen-metre length is the critical dimension that determines whether the cable reaches between your rack-mounted transceivers. Measure the patch-panel-to-switch distance before ordering; a shorter or longer assembly will be required if the run differs.

Highlights

  • Low insertion loss preserves signal quality with typical .2 dB and maximum .3 dB
  • High return loss above 38 dB reduces reflection in duplex LC connections
  • OM3 10-gigabit core supports 1G, 10G and 40G multimode transmission at 850 nm
  • Durable 3.0 mm PVC jacket withstands 1000 mating cycles and 330 mm bend radius
  • Wide operating range from -20 °C to 60 °C suits data centre and server environments

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 850 nm wavelength and LC duplex connectors work with my existing 10 GbE SFP+ transceivers?

Yes, the cable uses an OM3 10-gigabit core at 850 nm with duplex LC connectors, matching standard 10 GbE multimode transceivers.

How can I verify the link is healthy after I plug it in?

Check that insertion loss is near the typical 0.2 dB and return loss exceeds 38 dB on your switch or tester.

Does the 15 m aqua cable ship with protective caps and cable ties, or must I buy them separately?

The cable arrives with factory-fitted LC dust caps; cable ties or management clips are not included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.