Enfain
Enfain OM3 LC-LC Duplex Multimode Fibre Optic Cable 2m Aqua Blue
A 2-metre OM3 multimode patch cord with LC duplex connectors, 3.0 mm jacket and 850 nm wavelength rated for 10/40 GbE links
- Supports 10G speeds with OM3 10-gigabit core
- Low typical insertion loss of .2dB preserves signal strength
- Maximum insertion loss limited to .3dB for reliable links
- High return loss above 38dB reduces reflected light
- 0mm PVC jacket protects fibre in data-centre racks
Enfain OM3 Duplex Patch Cable
This Enfain OM3 duplex patch cable carries 10 gigabit multimode signals between LC ports. It suits installers wiring switches, servers or patch panels in a data-centre rack. The two metre aqua blue jacket makes the run easy to identify among other fibres.
3.0 mm PVC jacket with ceramic ferrules
A 3.0 mm PVC jacket protects the fibres while staying flexible enough for dense cable trays. Ceramic ferrules on each LC connector keep end faces aligned and resist wear over repeated mating. The cable tolerates a 330 mm bend radius and an operating range of minus 20 °C to plus 60 °C.
0.2 dB typical insertion loss
Typical insertion loss sits at 0.2 dB with a maximum of 0.3 dB, while return loss exceeds 38 dB at 850 nm. These figures confirm the link budget for 10 gigabit Ethernet over the rated distance. Buyers needing singlemode reach or higher bandwidth grades should select a different cable type.
Highlights
- Supports 10G speeds with OM3 10-gigabit core
- Low typical insertion loss of .2dB preserves signal strength
- Maximum insertion loss limited to .3dB for reliable links
- High return loss above 38dB reduces reflected light
- 0mm PVC jacket protects fibre in data-centre racks
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
What bandwidth does the OM3 multimode duplex LC-LC interface support in practice?
The OM3 10-gigabit core supports 1G, 10G and 40G links at 850 nm wavelength with typical insertion loss of .2 dB and maximum .3 dB, and return loss above 38 dB.
What physical space and bend allowance does the 2 m cable need?
The cable has a 3.0 mm PVC jacket and requires a minimum bend radius of 330 mm, so allow that clearance behind the patch panel or switch.
How do I install the ceramic-ferrule LC connectors without damaging them?
Align the keyed LC duplex clips, push straight in until they click, and never twist the ferrules — twisting is the step most people get wrong and can exceed the 1000-cycle rating.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket








