We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three straight SATA cables in UV red, 15 cm long, locking latches on both ends

EN-Labs

EN-Labs 3PKSATAIII6RD 3-pack SATA cable UV Red 6 inch

SKU CH-2KDW-XB3K8

Three SATA III cables with locking latches, 6 inch length, UV red colour, supporting 6 Gbps data transfer

  • TypeSATA Data Cable
  • ColorUV Red
  • Connector Number2
  • Speed6Gb/s
  • SpecificationsType: SATA III Data Cable w/ Locking Latch Length: 6 inch /
  • FeaturesEnLabs SATA 3 cable is designed to connect motherboards and

Color UV Red

Style Straight

  • Three cables included for multiple drive connections
  • SATA 3.0 interface supports up to 6Gbps transfer rates
  • Locking latches on both ends secure each connection
  • Straight 180-degree connectors fit tight drive bays
  • UV Red colour and 15 cm length simplify cable routing

What it is

A three-pack of straight SATA III data cables with locking latches, each 6 inch long and coloured UV Red. They connect motherboards or host controllers to internal Serial ATA hard drives and DVD drives for expanded storage. The cables carry data only and do not supply power to the attached drive.

Sustained transfer behaviour

Revision 3.0 supports up to 6 Gbps, twice the bandwidth of the previous revision, and remains backwards compatible with earlier SATA versions. Actual throughput is limited by the rating of the connected equipment, so sustained speeds will match the slowest device in the chain. The locking latch on each end keeps the connection secure during continuous operation.

Deciding specification

Each cable measures 6 inch (15 cm) from connector to connector with a 180-degree straight orientation on both ends. This fixed length suits tight internal routing but cannot reach drives mounted farther from the motherboard. Buyers needing longer runs or right-angle connectors should look elsewhere.

Highlights

  • Three cables included for multiple drive connections
  • SATA 3.0 interface supports up to 6Gbps transfer rates
  • Locking latches on both ends secure each connection
  • Straight 180-degree connectors fit tight drive bays
  • UV Red colour and 15 cm length simplify cable routing

Specifications

BrandEN-Lab
Model3PKSATAIII6RD
TypeSATA Data Cable
ColorUV Red
Connector Number2
Speed6Gb/s
SpecificationsType: SATA III Data Cable w/ Locking Latch Length: 6 inch / 15CM Color: UV Red UL listed RoHS compliant
FeaturesEnLabs SATA 3 cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be powered separately. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. (Data transfer speed is limited by rating of the attached equipment.) 3 Pack SATA 3 cable is a cost effective way to provide replacement or spare

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 6-inch SATA III cable generate any heat or noise during continuous operation?

The passive 15 cm data cable carries only signalling traffic, so it produces no audible noise and negligible heat even when the link runs at 6 Gbps all day.

What must I already have inside the case for these straight-to-straight cables to work?

You need a motherboard or host controller with a standard SATA port and a drive that also presents a standard SATA connector; the cables do not supply power, so a separate SATA power lead from the PSU is required for each drive.

Will the UV-red locking-latch cables work reliably with an older SATA I or SATA II drive I want to keep?

Yes — the SATA 3.0 interface is backwards compatible, so the 180-degree straight connectors will link at the drive’s native 1.5 or 3 Gbps rate without any configuration.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.