EN-Labs 3PKSATAIII6CLA 3-pack SATA 3.0 6Gbps straight to 90° locking cable clear 6 inch
- SATA Data Cable
- Clear
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Three SATA III data cables with locking latches, 6 inches long in UV green, rated for 6 Gbps transfer
Style Straight
This set contains three straight-to-straight SATA III cables, each 6 inches long and coloured UV green. They are intended for builders who need short internal links between a motherboard or host controller and Serial ATA hard drives or optical drives. The locking latch on every connector secures the connection against vibration. The pack suits fresh builds, RAID arrays or spare-cable storage.
At 6 inches the cables keep cable routing tight in compact cases, while the SATA Revision 3.0 rating supports up to 6 Gbps transfer speeds. Actual throughput depends on the attached drive and controller; older SATA I or II devices will operate at their own lower limits. The short reach cannot span full-tower distances or connect drives mounted far from the board.
Every connector features a locking latch that clicks into the drive and motherboard ports, preventing accidental disconnection during transport or heavy GPU installation. This mechanical detail is the deciding factor for anyone who values a secure, vibration-proof link over a friction-fit alternative.
| Brand | EN-Lab |
|---|---|
| Model | 3PKSATAIII6GN |
| Type | SATA Data Cable |
| Color | UV Green |
| Length | 6" |
| Cable Length | 6 in. |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Speed | 6Gb/s |
| Specifications | Type: SATA III Data Cable w/ Locking Latch Length: 6 inch / 15CM Color: UV Green UL listed RoHS compliant |
| Features | EnLabs SATA 3 cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be powered separately. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. (Data transfer speed is limited by rating of the attached equipment.) 3 Pack SATA 3 cable is a cost effective way to provide replacement or spare |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the SATA 3.0 cables are backwards compatible with SATA I and SATA II devices, though transfer speed will be limited by the slowest connected component.
Each connector has a locking latch that clicks securely into place; a firm tug on the cable should not disconnect it when the latch is fully seated.
Yes, these are data-only cables and do not supply power; each drive will still require a separate SATA power connection from your PSU.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?