EN-Labs 3PKSATAIII6CLA 3-pack SATA 3.0 6Gbps straight to 90° locking cable clear 6 inch
- SATA Data Cable
- Clear
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Three 24-inch SATA 3.0 cables with straight-to-right-angle connectors and locking latches for secure 6Gbps drive connections
Style 1 Angle
This pack contains three 24-inch SATA III data cables that connect motherboards or host controllers to internal hard drives and DVD drives. Each cable has a straight connector on one end and a 90-degree right-angle connector on the other. Locking latches on both ends keep the connections secure. The cables are black, UL listed and RoHS compliant.
The cables are rated for the SATA 3.0 standard at up to 6 Gbps and are backwards compatible with SATA I and SATA II. Actual transfer speed is limited by the rating of the attached drives and controllers. The locking latch design maintains a firm connection during continuous operation, reducing the chance of signal loss caused by vibration or cable movement inside the case.
One end is a straight 180-degree plug and the other is a 90-degree right-angle plug, so the cable routes cleanly against drive bays or motherboard edges where a straight connector would hit a side panel or another component. Builders who need two straight ends or two angled ends will need a different cable style.
| Brand | EN-Lab |
|---|---|
| Model | 3PKSATAIII24BKA |
| Type | SATA Data Cable |
| Color | Black |
| Length | 24" |
| Cable Length | 2 ft. |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Speed | 6Gb/s |
| Specifications | Type: SATA III Data Cable w/ Locking Latch Length: 24 inch / 60CM Color: Black UL listed RoHS compliant |
| Features | EnLabs SATA 3 cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be powered separately. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. (Data transfer speed is limited by rating of the attached equipment.) 3 Pack SATA 3 cable is a cost effective way to provide replacement or spare |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
No, the passive SATA 3.0 cables draw no power and have no moving parts, so they generate zero heat or noise during continuous operation.
You need a motherboard or host controller with SATA ports and SATA hard drives or DVD drives; the cables carry data only and do not supply power.
They are fully backwards compatible, so the cables will link at the maximum speed each older drive supports.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?