EN-Labs SATAIII10BK SATA III cable 10 inch 25CM black 180° locking latch
- SATA Data Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Three SATA III cables with locking latches, 6 inches long in UV blue, support 6 Gbps data transfer
Style Straight
This pack supplies three SATA III data cables, each fitted with a locking latch on both ends to keep connections secure during drive swaps or case moves. The 6 Gbps interface is backwards compatible with SATA I and SATA II devices. The UV-blue jacket makes cable routing easy to trace inside a chassis.
Each cable uses straight 180-degree connectors on both ends, so verify that your motherboard headers and drive sockets accept straight plugs without clearance issues. The cables carry data only and do not supply power, so a separate SATA power lead from the PSU is still required for every drive. Length is 15 cm (6 inch), which suits tight internal runs but will not reach distant drive bays.
The short length and locking latches work well for RAID arrays, SSD upgrades or optical-drive replacements where space is limited and vibration could loosen standard plugs. The three-pack also provides cost-effective spares for multi-system maintenance. Builders needing longer runs, right-angle connectors or combined power-and-data cables should look at something else.
| Brand | EN-Lab |
|---|---|
| Model | 3PKSATAIII6BL |
| Type | SATA Data Cable |
| Color | UV Blue |
| Length | 24" |
| Cable Length | 2 ft. |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Speed | 6Gb/s |
| Specifications | Type: SATA III Data Cable w/ Locking Latch Length: 6 inch / 15CM Color: UV Blue UL listed RoHS compliant |
| Features | EnLabs SATA 3 cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be powered separately. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. (Data transfer speed is limited by rating of the attached equipment.) 3 Pack SATA 3 cable is a cost effective way to provide replacement or spare |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The pack contains three 6-inch SATA III data cables with locking latches on both ends. No power cables are included; drives must be powered separately.
The 6-inch length suits tight chassis routing and RAID stacks where short runs reduce clutter. UV Blue adds visibility in windowed cases.
The cable supports SATA 3.0 up to 6 Gbps. Actual throughput depends on the drive and controller ratings; the cable itself does not limit performance below that ceiling.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?