EN-Labs SATA III data cable 3-pack locking latch 18 inch black
- SATA Data Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Three SATA III cables with locking latches, each 24 inches long in UV green for secure 6 Gbps drive connections
Style Straight
This three-pack supplies straight-to-straight SATA III data cables with locking latches, each measuring 24 inches or 60 centimetres. They connect motherboards or host controllers to internal Serial ATA hard drives and optical drives. The UV Green colour aids cable identification inside the chassis. Buyers who need right-angle connectors or longer runs should look elsewhere.
The cables conform to the SATA 3.0 specification with a maximum signalling rate of 6 Gbps. Actual throughput is limited by the slowest attached device, so pairing with SATA I or SATA II hardware reduces the effective speed. Backwards compatibility allows use with older ports, but the 6 Gbps ceiling cannot be exceeded. No power conductors are included; drives require separate power connections.
Each end features a locking latch that resists accidental disconnection during drive swaps or case movement. This mechanical retention is the deciding factor for builders who prioritise a secure data path in vibration-prone environments. Without the latch, a standard friction-fit connector may loosen over time and interrupt transfers.
| Brand | EN-Lab |
|---|---|
| Model | 3PKSATAIII24GN |
| Type | SATA Data Cable |
| Color | UV Green |
| Length | 24" |
| Cable Length | 2 ft. |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Speed | 6Gb/s |
| Specifications | Type: SATA III Data Cable w/ Locking Latch Length: 24 inch / 60CM Color: UV Green UL listed RoHS compliant |
| Features | EnLabs SATA 3 cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be powered separately. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. (Data transfer speed is limited by rating of the attached equipment.) 3 Pack SATA 3 cable is a cost effective way to provide replacement or spare |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
These cables are 24 inch (60 cm) long; choose them if that reach fits your drive-to-motherboard routing, otherwise select a shorter or longer length.
The cables support SATA 3.0 at up to 6 Gbps, but real-world speed is limited by the drive and controller you connect.
SATA 3.0 is backwards compatible with SATA I and SATA II; the link will run at the highest speed both ends support.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?