EN-Labs 3PKSATAIII24BLA 3-pack SATA cable UV Blue 24" straight to 90° locking latch
- SATA Data Cable
- UV Blue
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Three 10-inch SATA III cables with locking latches for secure 6Gbps drive connections in UV Red
Style Straight
This three-pack supplies straight-to-straight SATA III data cables, each 10 inches or 25 centimetres long, for linking motherboards or host controllers to internal hard drives and DVD drives. The UV red colour helps identify cables inside a busy chassis. Locking latches on both ends of every cable prevent accidental disconnection during operation. The set is UL listed and RoHS compliant.
Each cable carries a locking latch at both connectors so the link stays secure under vibration or when routing through tight spaces. The UV red jacket makes individual cables easy to trace during builds or troubleshooting. Having three identical cables in one pack covers RAID arrays, multi-drive upgrades or spare replacements without extra orders. No power conductors are included; drives must receive power separately.
The cables conform to SATA revision 3.0 and support up to 6 Gbps data transfer, with actual speed limited by the attached drive and controller. They remain backward compatible with SATA I and SATA II devices. The 10-inch length suits compact cases or short runs between adjacent drive bays. Builders needing longer reaches or right-angle connectors will need a different cable.
| Brand | EN-Lab |
|---|---|
| Model | 3PKSATAIII10RD |
| Type | SATA Data Cable |
| Color | UV Red |
| Length | 10 inch / 25CM |
| Cable Length | 10 in. |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Speed | 6Gb/s |
| Specifications | Type: SATA III Data Cable w/ Locking Latch Length: 10 inch / 25CM Color: UV Red UL listed RoHS compliant |
| Features | EnLabs SATA 3 cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be powered separately. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. (Data transfer speed is limited by rating of the attached equipment.) 3 Pack SATA 3 cable is a cost effective way to provide replacement or spare |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The latch is moulded into each SATA connector and rated for the cable's service life; no separate replacement part is required.
The attached drive or controller caps real-world speed; the cable itself supports the full 6 Gbps specification.
They are passive copper conductors with no active circuitry, so they contribute negligible heat and zero extra power draw.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?