We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three clear SATA cables, straight to 90-degree connectors, 24 inch length

EN-Labs

EN-Labs 3PKSATAIII24CLA 3-pack SATA cable straight to 90° right-angle 24 inch clear

SKU CH-PV4K-2EA1G

Three SATA III data cables with locking latches, straight-to-90° connectors and 24-inch length for internal drives

  • TypeSATA Data Cable
  • ColorClear
  • Length24"
  • Cable Length2 ft.
  • Connector Number2
  • Connector Detail1 x SATA to 1 x SATA

Color Clear

Style 1 Angle

  • Straight-to-90° connectors simplify routing in tight cases
  • Locking latches on both ends secure connections against vibration
  • 6 Gbps SATA III speed supports modern SSDs and HDDs
  • Three cables in one pack cover RAID or spare needs
  • 24-inch length reaches drives across full-size chassis

Three-pack SATA III cables with locking latches

This three-pack supplies straight-to-90-degree SATA III data cables for connecting motherboards or host controllers to internal hard drives and optical drives. Each cable measures 24 inches and features a clear jacket. The locking latch on both ends secures the connection against vibration or cable movement.

Sustained 6 Gbps throughput under continuous load

The cables conform to the SATA 3.0 specification, supporting up to 6 Gbps data transfer during extended read and write sessions. Backward compatibility with SATA I and SATA II ensures the link negotiates the highest speed the attached equipment allows. Actual sustained throughput is limited by the rating of the connected drive and controller.

Straight-to-right-angle connector orientation

One end terminates in a straight 180-degree plug while the other ends in a 90-degree right-angle plug, letting the cable route cleanly along drive edges or tight chassis corners. The fixed orientation suits builds where a straight plug would block adjacent ports or exceed clearance. Builders needing two straight ends or two angled ends should select a different cable.

Highlights

  • Straight-to-90° connectors simplify routing in tight cases
  • Locking latches on both ends secure connections against vibration
  • 6 Gbps SATA III speed supports modern SSDs and HDDs
  • Three cables in one pack cover RAID or spare needs
  • 24-inch length reaches drives across full-size chassis

Specifications

BrandEN-Lab
Model3PKSATAIII24CLA
TypeSATA Data Cable
ColorClear
Length24"
Cable Length2 ft.
Connector Number2
Connector Detail1 x SATA to 1 x SATA
Speed6Gb/s
SpecificationsType: SATA III Data Cable w/ Locking Latch Length: 24 inch / 60CM Color: Clear UL listed RoHS compliant
FeaturesEnLabs SATA 3 cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be powered separately. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. (Data transfer speed is limited by rating of the attached equipment.) 3 Pack SATA 3 cable is a cost effective way to provide replacement or spare

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Do the 24 inch SATA cables generate any noticeable heat or noise when running all day?

No, these passive SATA III data cables carry only signal traffic and draw no power themselves, so they produce no heat or audible noise during continuous operation.

What must I already have inside the case for these straight-to-90-degree cables to work?

You need a motherboard or host controller with a standard SATA port and a SATA hard drive or DVD drive; the cables supply only the data link, so each drive still requires its own separate power connection from the PSU.

Will the 6 Gbps SATA III cables work reliably with older SATA I or SATA II drives I want to keep?

Yes, the cables are backwards compatible with SATA I and SATA II devices; the link will simply run at the lower speed supported by the older drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.