We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 3-foot power extension cord with male C14 plug and female C19 socket

Cable Leader

Cable Leader 3ft C14 to C19 Power Extension Cord 14 AWG 15A 250V White

SKU CH-DWMK-0NYRP

A 3 ft white IEC 60320 C14-to-C19 extension cord rated 14 AWG, 15 A at 250 V with UL and CSA certification

  • ColorWhite
  • Length36" - 40"
  • Connector Number2
  • Wire Gauge14 AWG

Length 3ft

Color White

  • Extends C14-to-C19 power links without an adapter
  • Heavy-duty 14 AWG copper rated 15 A / 250 V
  • UL Listed and CSA certified (file E210037)
  • White SJT jacket simplifies rack circuit tracing
  • Three-foot length adds reach inside server cabinets

Extends C14 to C19 power reach

This three-foot white extension cord adds length between a rack PDU, UPS or server and an existing C19 power cord. The male IEC 60320 C14 plug connects to the power source while the female C19 socket accepts the equipment cable. The white jacket helps trace circuits and phases at a glance in dense racks.

Heavy duty 14 AWG construction

Built with three-conductor grounded copper wire at 14 AWG, the cord is rated for 15 amps at 250 volts. The SJT jacket carries a 105°C temperature rating and a 300-volt cable rating for continuous server and data-centre loads. UL Listed and CSA certified under file E210037, it also meets RoHS compliance.

Sustained load performance

Under continuous draw the 14 AWG conductors maintain their rated 15-amp capacity without overheating thanks to the 105°C jacket rating. The grounded three-conductor design provides stable power delivery for servers, switches and AV gear that run around the clock. UL and CSA certification confirms the assembly meets safety standards for prolonged operation in rack environments.

Highlights

  • Extends C14-to-C19 power links without an adapter
  • Heavy-duty 14 AWG copper rated 15 A / 250 V
  • UL Listed and CSA certified (file E210037)
  • White SJT jacket simplifies rack circuit tracing
  • Three-foot length adds reach inside server cabinets

Specifications

BrandGENERIC
ColorWhite
Length36" - 40"
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I connect the C14-to-C19 cord to my PDU and server?

Plug the male C14 end into the PDU or UPS outlet, then insert your equipment cord into the female C19 socket; the key mistake is forcing the C19 plug upside down — align the flat side with the socket notch.

Will the SJT jacket or 14 AWG conductors need replacement over time?

The 105 °C SJT jacket and copper conductors are rated for continuous 15 A / 250 V service; no scheduled replacement is required unless the jacket is cut or the connectors show heat discoloration.

At what load does the 14 AWG gauge hit its thermal limit first?

The cord is UL Listed for 15 A at 250 V; sustained loads above 15 A will cause the 14 AWG conductors to reach their temperature rating before any other component.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.