We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 3 ft IEC C14 to C19 heavy duty power extension cord with SJT jacket

Cable Leader

Cable Leader 3ft IEC C14 to C19 Heavy Duty Power Extension Cord 14 AWG 15A 250V Red

SKU CH-TNW4-7ZMV0

Adds reach to C14/C19 power links with a 3 ft, 14 AWG, 15A/250V SJT jacketed cord, UL Listed and CSA certified

  • ColorRed
  • Length36" - 40"
  • Connector Number2
  • Wire Gauge14 AWG

Length 3ft

Color Red

  • Extends C14-to-C19 power runs without extra adapters
  • Heavy-duty 14 AWG copper rated 15A/250V for server loads
  • UL Listed and CSA certified (file E210037) for safety compliance
  • Red SJT jacket enables quick circuit tracing in racks
  • IEC 60320 connectors fit standard PDU, UPS and server gear

Power reach for rack gear

This 3 ft red extension cord adds length between a C14 outlet on a PDU or UPS and a C19 inlet on a server or switch. It is built for data-centre and rack environments where existing cords fall short of the power source. The heavy-duty construction suits continuous 15 A loads at 250 V without needing an adapter.

Thermals noise and power in use

The 14 AWG SJT jacket carries three grounded copper conductors rated for 105 C and 300 V, so the cable stays cool under full 15 A draw. No fan or active cooling is involved, therefore the cord adds no audible noise to the rack. Power loss over the short run is negligible for the rated 250 V supply.

Build quality and daily handling

UL Listed and CSA certified (file E210037) with RoHS compliance, the assembly uses moulded IEC 60320 C14 male and C19 female connectors that lock securely into standard rack PDUs. The red SJT sheath resists abrasion and makes circuit tracing simple in dense cable bundles. Lifetime replacement backing from the US-based brand covers any failure.

Highlights

  • Extends C14-to-C19 power runs without extra adapters
  • Heavy-duty 14 AWG copper rated 15A/250V for server loads
  • UL Listed and CSA certified (file E210037) for safety compliance
  • Red SJT jacket enables quick circuit tracing in racks
  • IEC 60320 connectors fit standard PDU, UPS and server gear

Specifications

BrandGENERIC
ColorRed
Length36" - 40"
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I connect the male C14 plug to a rack PDU and avoid the common mistake of forcing the female C19 socket onto a C13 inlet?

Align the keyed C14 pins with the PDU outlet and push straight in until it seats; the female C19 end only accepts a matching C19 plug — never force it onto a smaller C13 inlet or you will damage both connectors.

Will the SJT jacket or the 14 AWG copper conductors need periodic replacement in a 105°C rated environment?

The 105°C / 300V SJT jacket and grounded 3-conductor copper are rated for continuous server-rack temperatures; no scheduled replacement is required unless the cable shows cuts, melting or connector damage.

At what sustained load does the 15A / 250V rating become the limiting factor during continuous server operation?

The cord is rated for 15A at 250V; sustained draws above 15A will exceed the UL Listed and CSA certified limit (file E210037) and trip upstream protection.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.