We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 6 ft C14 to C19 power extension cord with SJT jacket

Cable Leader

Cable Leader 6ft C14 to C19 14 AWG 15A 250V White Power Extension Cord

SKU CH-SCGE-SG8XV

A 6 ft white extension cord with a male C14 plug and female C19 socket, 14 AWG rated 15A at 250V for server and PDU connections

  • ColorWhite
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 6ft

Color White

  • Extends C14-to-C19 reach without extra adapters
  • 14 AWG copper handles 15 A at 250 V for server loads
  • White SJT jacket simplifies circuit tracing in racks
  • UL Listed and CSA certified (file E210037)
  • IEC 60320 C14 plug to C19 socket fits standard PDUs

C14-to-C19 rack extension cord

This white IEC 60320 C14 male to C19 female cord adds six feet of reach between a rack PDU, UPS or server and your existing power cable. It is built for data-centre and server-room installations where standard cables fall short. The UL Listed and CSA certified assembly carries file E210037 and meets RoHS requirements.

14 AWG 15A 250V SJT limits

The 14 AWG three-conductor copper cable with SJT jacket is rated for 15 amps at 250 volts and a 105 °C / 300 V cable rating. It suits loads up to 15 A, while 18 AWG handles only 10 A, 16 AWG handles 13 A and 12 AWG is required for 20 A equipment. Circuits demanding more than 15 A or a higher temperature rating fall outside this cord's certified capacity.

Six-foot reach for high-draw gear

The six-foot length comfortably spans adjacent rack units or a PDU-to-server gap without excess slack. It cleanly powers servers, switches and AV gear that draw up to 15 A on a C19 inlet. Runs needing 20 A service or longer cable runs will require a heavier gauge or a different length.

Highlights

  • Extends C14-to-C19 reach without extra adapters
  • 14 AWG copper handles 15 A at 250 V for server loads
  • White SJT jacket simplifies circuit tracing in racks
  • UL Listed and CSA certified (file E210037)
  • IEC 60320 C14 plug to C19 socket fits standard PDUs

Specifications

BrandGENERIC
ColorWhite
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Which gauge should I choose for a server rack drawing up to 15 A?

The 14 AWG version is rated 15 A / 250 V and is intended for server, PDU and higher-draw equipment, while 18 AWG covers up to 10 A and 16 AWG up to 13 A.

What does the 15 A / 250 V rating mean once the cord is installed in a rack?

It means the cord can continuously carry 15 A at up to 250 V when plugged into a compatible PDU or UPS, limited by the 14 AWG copper conductors and SJT jacket rated 105 °C / 300 V.

What does the IEC 60320 C14-to-C19 interface cap in practice?

The C14 male plug fits standard rack PDUs and UPS outlets, and the C19 female socket accepts a matching C19 cord, so the combination is limited to 15 A / 250 V as defined by the connector standard.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.