STARTECH
STARTECH C6PATCH1RD 1 ft Red Cat6 network ethernet cable
A 1 ft red Cat6 patch cable with molded connectors for 10Gbps up to 160 ft and 100W PoE
- Typeothers
- Length1 ft
- ColorRed
- FeaturesCable Features:Molded Cable Characteristic:Patch Cable
- 1 ft length keeps desk runs tidy
- Red jacket makes the cable easy to spot
- 24 AWG stranded copper supports 10 Gbps up to 160 ft
- Molded strain relief protects the RJ45 connectors
- UL E132276-A rated for 100 W PoE
1 ft Red Cat6 Patch Cable
This 1 ft red Cat6 patch cable uses 24 AWG stranded 100 percent copper conductors with UL rating E132276-A and molded RJ45 connectors. It is built for short runs between a switch, router or wall jack and a desktop, laptop or access point where a compact link is preferred. The red jacket helps identify the connection in a busy rack or home office.
Supports 10 Gbps up to 160 ft and 250 MHz bandwidth
The cable meets Cat6 electrical performance and is rated for 10 Gbps operation up to 160 ft, with a tested bandwidth of 250 MHz. It also carries 100 W Power over Ethernet for devices such as wireless access points or IP cameras. The stranded construction keeps the cord flexible for patch-panel or desktop use.
Verify connector spacing
Because the cable is only 1 ft long, confirm that the two RJ45 ports you intend to link are close enough that the molded boots will not strain the jacks. Check that the red UTP jacket fits your colour-coding scheme and that the run does not require a longer reach or a crossover pin-out.
Highlights
- 1 ft length keeps desk runs tidy
- Red jacket makes the cable easy to spot
- 24 AWG stranded copper supports 10 Gbps up to 160 ft
- Molded strain relief protects the RJ45 connectors
- UL E132276-A rated for 100 W PoE
Specifications
| Brand | StarTech.com |
|---|---|
| Model | C6PATCH1RD |
| Type | others |
| Length | 1 ft |
| Color | Red |
| Features | Cable Features:Molded Cable Characteristic:Patch Cable |
| Shipping weight | 0.03 kg |
| Package size | 213 × 198 × 15 mm |
Questions about this item
What length should I choose for a short rack or desk connection?
The 1 ft length is intended for very short runs such as patch panels or adjacent devices; longer cables are not covered by this listing.
What real-world speeds can I expect from this Cat6 patch cord?
It supports Multi-Gigabit rates of 1, 2.5, 5 and 10 Gbps up to 160 ft, so the 1 ft cord will deliver full negotiated speed without distance loss.
Which connector standard does the RJ45 plug follow and what does it limit?
The molded RJ45 plugs use standard 8P8C wiring; the 24 AWG stranded copper and 250 MHz rating cap performance at the Cat6 specification.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



