We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 10 ft power extension cord with male C14 plug and female C13 socket, SJT jacket

Cable Leader

Cable Leader 10ft IEC C14 to C13 Power Extension Cord 18 AWG White

SKU CH-261H-AFMQF

A 10 ft white extension cord with a male C14 plug and female C13 socket, 18 AWG rated for 10A at 250V, UL Listed and CSA certified for rack PDU and server connections

  • ColorWhite
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge18 AWG

Length 10ft

Color White

  • Extends C14 to C13 power connections by 10 ft without adapters
  • 18 AWG copper handles 10 A at 250 V for rack and server loads
  • SJT jacket rated 105 °C and 300 V protects conductors in dense cabinets
  • White colour simplifies circuit tracing and phase identification in the rack
  • UL Listed and CSA certified (file E210037) with RoHS compliance

Extending C14 to C13 Connections

This 10 ft white extension cord adds reach between a PDU, UPS or server and your existing C13 power cord. The male IEC 60320 C14 plug connects to the power source while the female C13 socket accepts your device cable. It uses 18 AWG, 3-conductor grounded copper with an SJT jacket rated 105C / 300V. UL Listed and CSA certified (file E210037), RoHS compliant.

Practical Limits of 18 AWG Rating

The 18 AWG conductors are rated for up to 10A at 250V, suitable for light electronics and standard rack gear. Heavier loads need thicker wire: 16 AWG handles up to 13A for computers, 14 AWG up to 15A for servers and PDUs, and 12 AWG up to 20A for heavy-duty 20A equipment. Exceeding the 10A limit on this cord can cause overheating.

Check Your Existing Setup First

Verify that your power source provides a C14 inlet and your equipment uses a C13 plug before ordering. Confirm the total current draw of connected devices stays within the 10A rating of this 18 AWG cord. The white jacket helps trace circuits in a rack, but ensure the 10 ft length fits your cable management plan without excess slack.

Highlights

  • Extends C14 to C13 power connections by 10 ft without adapters
  • 18 AWG copper handles 10 A at 250 V for rack and server loads
  • SJT jacket rated 105 °C and 300 V protects conductors in dense cabinets
  • White colour simplifies circuit tracing and phase identification in the rack
  • UL Listed and CSA certified (file E210037) with RoHS compliance

Specifications

BrandGENERIC
ColorWhite
Length5 - 10 ft.
Connector Number2
Wire Gauge18 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Which gauge should I choose for a 10 A server load?

The 18 AWG cord is rated 10 A / 250 V and suits light electronics; 16 AWG handles 13 A, 14 AWG handles 15 A, and 12 AWG handles 20 A for heavier equipment.

What does the 10 A / 250 V rating mean in my rack?

It means the cord safely carries up to 10 amps at 250 volts for typical server, switch or AV gear without overheating its 105 °C SJT jacket.

What does the IEC 60320 C14 to C13 interface limit in practice?

The standard C14 plug and C13 socket cap the connection at 10 A / 250 V, so the cord cannot exceed that rating even if a heavier-gauge cable were used.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.