We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six SATA 7-pin male connectors on each end of a 50cm cable

Aomoproing

Aomoproing SAS 6 SATA 7Pin Male to 6 SATA 7Pin Male Cable 50cm

SKU CH-630H-J91RV

Connects six SATA drives to a RAID controller with six 7-pin male connectors and 6 Gbps speed

Cable Length 1m

  • Connect up to six SATA drives to a single controller
  • Supports 6 Gb/s SATA specification for reliable data transfer
  • 50 cm length suits compact server and RAID builds
  • 12 total SATA 7-pin connectors (6 host, 6 device)
  • Straight-through SAS-to-SATA wiring for broad compatibility

Six-drive SATA cable for RAID controllers

This internal cable links a six-port SATA RAID controller to up to six SATA hard drives or SSDs using 7-pin male connectors on both ends. It is built to the 6 Gb/s SATA specification and suits server or workstation builders who need a tidy multi-drive connection. The 50 cm length keeps routing neat inside standard chassis.

Suits single-controller arrays, not split backplanes

The cable serves administrators assembling a single-controller RAID set or a direct-attached storage shelf where one host port fans out to six drives. It does not suit installations that require a splitter or expander to divide one controller port across multiple backplanes. Buyers needing longer reach between distant drive cages should look for a different cable length.

Six SATA 7-pin male connectors per end

Each end carries six standard SATA 7-pin male plugs, giving a one-to-one mapping between controller ports and drive ports. The design follows the 6 Gb/s SATA specification while the connectors are rated for 12 Gb/s SAS signalling. Verify that your RAID controller and drive backplane both present six SATA 7-pin headers before ordering.

Highlights

  • Connect up to six SATA drives to a single controller
  • Supports 6 Gb/s SATA specification for reliable data transfer
  • 50 cm length suits compact server and RAID builds
  • 12 total SATA 7-pin connectors (6 host, 6 device)
  • Straight-through SAS-to-SATA wiring for broad compatibility

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the 6 Gb/s SATA spec actually deliver once the cable is installed in a server?

The cable meets the 6 Gb/s SATA specification, so each of the six attached drives can transfer data at up to 6 Gb/s when connected to a compatible controller.

Which interface standard does the cable use and what speed does it cap at in practice?

It uses the SATA 7-pin interface and is rated for 6 Gb/s per drive; the connectors are designed for the next generation of SAS at 12 Gb/s but SATA operation remains at 6 Gb/s.

What physical space and connectors are needed to fit this 50 cm cable inside a chassis?

The cable requires a host with six SATA 7-pin ports and provides six SATA 7-pin device connectors spaced along a 50 cm length for internal drive mounting.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.