We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four half-sleeved SATA cables with double 90° connectors, .5m each, labelled P1 to P4

Aomoproing

Aomoproing 4-pack SATA cable double 90° 0.5m

SKU CH-HDN2-Y9724

Four SATA data cables with 90-degree connectors on both ends, 0.5 m each, support 6 Gbps transfers and include labels for RAID routing

Cable Length 1m

  • Four right-angled connectors fit tight server bays
  • 6 Gbps data rate moves large files quickly
  • Braided sleeve bundles four cables for clean routing
  • Labelled ends simplify RAID or multi-drive setups
  • Works with 2.5″ SSDs, 3.5″ HDDs and optical drives

Four-pack SATA data cables

This set contains four 0.5 metre cables that connect motherboards or host controllers to SATA hard drives, SSDs and optical drives. Each cable carries data only and does not supply power to the attached device. The cables support up to 6Gbps transfer rates and are backward compatible with slower SATA revisions.

Double 90-degree connectors ease routing

Both ends of every cable use a 90-degree SATA 7-pin plug so they sit flat against drive and board edges in tight server chassis. The thin SAS-style wires are half-sleeved and braided together, and each lead is labelled P1 to P4 to simplify RAID or multi-drive wiring. No driver installation is required; the link is purely passive.

Check port clearance and power separately

Verify that your drives and controller have standard SATA 7-pin data ports and that the 90-degree orientation matches the available space around each connector. Remember that a separate SATA power cable from the power supply is still needed for every drive. The 0.5 metre length suits compact builds but may not reach distant drive bays in full-size cases.

Highlights

  • Four right-angled connectors fit tight server bays
  • 6 Gbps data rate moves large files quickly
  • Braided sleeve bundles four cables for clean routing
  • Labelled ends simplify RAID or multi-drive setups
  • Works with 2.5″ SSDs, 3.5″ HDDs and optical drives

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I verify the 6Gbps link is active after connecting the double 90° cables?

Check the motherboard BIOS or operating system drive information; the interface should report a 6Gbps SATA connection for each attached drive.

What comes in the pack and what must be sourced separately for a drive installation?

The pack contains four 0.5m double 90° SATA 7-pin data cables; a separate SATA power cable from the power supply is required for each drive.

Which cable length suits a compact server chassis with tight routing?

The 0.5m length keeps excess cable minimal, and the labelled P1–P4 ends help route each cable cleanly in confined spaces.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.