We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red and black cable with 36-pin Mini SAS SFF-8087 male connector splitting to four SATA 7-pin female connectors, 0.5 m total length

Aomoproing

Aomoproing Mini SAS SFF-8087 36-pin male to 4 SATA 7-pin female cable 0.5 m

SKU CH-D604-23KFE

Connects a Mini SAS SFF-8087 controller to four SATA drives with a 0.5 m cable supporting 10.0 Gbps data transfer

Cable Length 1m

  • Connects one controller to four drives via Mini SAS SFF-8087 36-pin male to 4 SATA 7-pin female
  • Supports data transfer up to 10.0 Gbps for fast storage performance
  • Half-metre length keeps server chassis cabling tidy
  • Red and black PVC jacket protects copper conductors
  • Supplied as a single ready-to-use cable assembly

Connectivity & Layout

This new Aomoproing cable bridges a Mini SAS SFF-8087 36-pin male port on a host controller to four SATA 7-pin female drive connectors. The half-metre length keeps routing tidy inside a server chassis or storage enclosure. PVC jacket and copper conductors are rated for a data transfer rate up to 10.0 Gbps. The red-and-black colour scheme aids quick cable identification.

Who It Suits

Builders connecting up to four SATA hard drives or SSDs to a single Mini SAS port on a RAID card or HBA will find the pin-out matches standard backplane wiring. The short reach works best when the controller and drive cage sit close together. Buyers needing longer runs to distant drive bays, or who require a right-angle Mini SAS plug for tight clearance, should look at something else.

Deciding Specification

The transfer ceiling of 10.0 Gbps sets the practical throughput limit for every attached drive. If the controller or drives operate above that ceiling the cable becomes the bottleneck. Confirm the host port is a genuine SFF-8087 36-pin interface before ordering.

Highlights

  • Connects one controller to four drives via Mini SAS SFF-8087 36-pin male to 4 SATA 7-pin female
  • Supports data transfer up to 10.0 Gbps for fast storage performance
  • Half-metre length keeps server chassis cabling tidy
  • Red and black PVC jacket protects copper conductors
  • Supplied as a single ready-to-use cable assembly

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 0.5 m cable reach from a PCIe HBA bracket to a 4-bay backplane in a 2U chassis?

At 0.5 m the Mini SAS SFF-8087 male plug connects to the controller while the four SATA 7-pin female ends reach drives in a compact 2U enclosure.

Which way round do I plug the 36-pin Mini SAS SFF-8087 male connector into the controller?

The keyed SFF-8087 male end inserts one way only; forcing it the wrong way bends pins and breaks the link.

When should I replace the red-and-black PVC jacketed assembly?

Swap the cable if the jacket cracks, pins bend or any drive drops off the controller at the rated 10.0 Gbps rate.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.