We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue SFF-8087 male to four 90-degree SATA female breakout cable, 1.64ft, black mesh sleeve

Aomoproing

Aomoproing SFF-8087 to 4x SATA 90° Breakout Cable 1.64ft Blue/Black

SKU CH-96XK-PYXG0

Connects a Mini SAS 8087 host controller to four 90-degree SATA drives at 6Gbps per port over a 1.64ft blue and black sleeved cable

Cable Length 1m

  • Connects RAID controller to four SATA drives via SFF-8087
  • 6Gbps per port for high-throughput storage access
  • 90-degree SATA connectors ease routing in tight chassis
  • 64ft length with woven mesh sleeve protects signal integrity
  • P1-P4 markers simplify drive identification after installation

Internal SFF-8087 breakout cable

This 1.64 ft cable connects a RAID or PCIe controller that has an SFF-8087 port to four SATA drives. The SFF-8087 male end uses a latch lock for a secure host connection. Four right-angle SATA female connectors with latch locks attach to target drives or a backplane. A woven mesh sleeve covers half the length for easier routing.

Builders with SFF-8087 controllers

Suits anyone adding up to four SATA drives to a compatible host bus adapter that presents an SFF-8087 interface. Each port supports up to 6 Gbps data transfer. Not for systems that lack an SFF-8087 host connector, need straight SATA plugs, or require a different Mini SAS pinout.

SFF-8087 host interface

The single deciding specification is the SFF-8087 male connector on the controller side. If your RAID or PCIe card does not expose an SFF-8087 port, this cable cannot be used.

Highlights

  • Connects RAID controller to four SATA drives via SFF-8087
  • 6Gbps per port for high-throughput storage access
  • 90-degree SATA connectors ease routing in tight chassis
  • 64ft length with woven mesh sleeve protects signal integrity
  • P1-P4 markers simplify drive identification after installation

Specifications

No published specifications for this item yet.

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the SFF-8087 male connector with latch locking fit my existing RAID controller port?

The 36-pin SFF-8087 male plug is the standard host interface for SAS RAID and HBA cards, so it mates directly with any controller that presents an SFF-8087 receptacle.

How can I verify each of the four SATA links is running at 6Gbps after installation?

Check the host adapter BIOS or OS utility; each port should negotiate 6 Gb/s and show the attached drive model without errors.

Does the package include the four right-angle SATA data cables or must I source them separately?

The breakout cable integrates four 90-degree SATA female connectors on a single 1.64 ft assembly, so no separate SATA data cables are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.