We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Aomoproing

Aomoproing Fiber DisplayPort 1.4 Cable 330ft 32.4Gbps 8K60 4K144

SKU CH-NX87-AZ8JQ

A 330 ft fiber-optic DisplayPort 1.4 cable delivering 32.4 Gbps for 8K at 60 Hz or 4K at 144 Hz with a slim, flexible DP-to-DP design

Cable Length 330 ft.

  • Connect at 8K 60 Hz with 32.4 Gbps bandwidth
  • Drive 4K 144 Hz gaming over 330 ft fibre link
  • Transmit 4K 240 Hz signals through slim in-wall cable
  • Carry 8.1 Gbps per lane on 20-pin DP connectors
  • Bridge PC to display with tinned copper and fibre conductors

Long-distance DisplayPort 1.4 link

This 330 ft fiber-optic cable carries a DisplayPort 1.4 signal between a PC or laptop and a monitor, projector or HDTV. The hybrid tinned-copper and fiber construction maintains 32.4 Gbps bandwidth over the full length. It targets installers and integrators who need to bridge rooms, floors or conduit runs without signal loss. The slim profile eases in-wall routing.

Thermals noise and power

Passive fiber transmission generates no heat and adds no audible noise to the system. The cable draws only the small amount of power supplied by the DisplayPort source for the optical transceivers. No external adapter or local power outlet is required at either end. Normal operation stays within the standard DisplayPort source-current limits.

Build integration

Male-to-male 20-pin connectors plug directly into standard DisplayPort ports on graphics cards, docking stations and displays. The narrow, flexible jacket fits through typical conduit and tight bends, freeing rack space and eliminating the need for active repeaters or extenders. It supports 8K at 60 Hz, 4K at 144 Hz and 4K at 240 Hz, plus ultra-wide 3440×1440 at 60 Hz and 2550×1440 at 60 Hz. Not suited for runs shorter than a few metres where a copper cable is simpler or for builders who need angled or locking connectors.

Highlights

  • Connect at 8K 60 Hz with 32.4 Gbps bandwidth
  • Drive 4K 144 Hz gaming over 330 ft fibre link
  • Transmit 4K 240 Hz signals through slim in-wall cable
  • Carry 8.1 Gbps per lane on 20-pin DP connectors
  • Bridge PC to display with tinned copper and fibre conductors

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 330ft fiber DisplayPort 1.4 cable and what step do people get wrong?

Route the slim fiber cable through walls or conduit first, then connect the 20pin male DisplayPort plugs to source and display. The common mistake is pulling on the connector heads instead of the cable body, which can damage the internal fiber alignment.

What maintenance or replacement will the 330ft fiber DP 1.4 cable need later?

The fiber conductors and tinned copper wiring are passive with no moving parts, so no scheduled maintenance is required. Replace the cable only if physical damage occurs to the jacket or connectors, or if signal loss appears at 8K60 or 4K144 resolutions.

What limit shows up first under sustained use of the 330ft fiber DisplayPort 1.4 cable?

The 32.4Gbps HBR3 bandwidth ceiling is the first hard limit. At 8K60 or 4K240 you are using the full 8.1Gbps per lane, so any additional overhead from deep colour or high refresh rates will hit that ceiling before thermal or signal degradation becomes a factor.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.