We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Long thin DisplayPort cable with straight connectors on both ends

Aomoproing

Aomoproing 330Feet DisplayPort 1.4 Fiber Optic Cable

SKU CH-9P2G-KMPRG

A 330-foot fiber-optic DisplayPort 1.4 cable supporting 8K at 60 Hz and 4K at 144 Hz with 32.4 Gbps bandwidth

Cable Length 330 ft.

  • Transmit 8K at 60 Hz over 330 feet with fiber-optic DisplayPort 1.4
  • Drive 4K at 144 Hz or 240 Hz for smooth gaming and editing
  • 4 Gbps HBR3 bandwidth carries uncompressed video and audio reliably
  • DSC 1.2 support keeps high-resolution signals intact across long runs
  • Tinned-copper-and-fiber construction resists interference for stable in-wall installs

330-Foot Fiber Optic DisplayPort Cable

This DisplayPort 1.4 fiber optic cable spans 330 feet for long-distance video and audio links between a PC or laptop and a monitor, projector or HDTV. The optical construction avoids signal loss that limits copper cables at this length. It targets installers and enthusiasts who need an in-wall run or a cross-room connection without repeaters.

Verify Port Version and Direction Before Installing

Confirm that both source and display have full-size DisplayPort 1.4 ports capable of HBR3 bandwidth. The cable is directional; the connector marked “Source” must plug into the graphics card or laptop and the “Display” end into the monitor or projector. Reversing the ends will break the link. Ensure the installation path can accommodate the cable bend radius and that no sharp kinks occur during the pull.

Male-to-Male 20-Pin Connectors

Each end carries a standard 20-pin male DisplayPort connector built with tinned copper and fiber conductors for 32.4 Gbps throughput. The hybrid construction keeps the cable thinner and lighter than an all-copper equivalent, easing long pulls through conduit or walls. The plug shells latch securely, preventing accidental disconnects in permanent installations.

Highlights

  • Transmit 8K at 60 Hz over 330 feet with fiber-optic DisplayPort 1.4
  • Drive 4K at 144 Hz or 240 Hz for smooth gaming and editing
  • 4 Gbps HBR3 bandwidth carries uncompressed video and audio reliably
  • DSC 1.2 support keeps high-resolution signals intact across long runs
  • Tinned-copper-and-fiber construction resists interference for stable in-wall installs

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What connectors are on the cable and is anything else needed to use it?

The cable has DisplayPort 20-pin male connectors on both ends and uses a tinned copper plus fibre conductor. No extra adapters are required for a standard DisplayPort source and display.

How do I decide which length to buy for my installation?

The cable is offered in a 330-foot length. Choose this version when the source and display are far apart, such as in-wall or projector setups, and a shorter run would not reach.

What does the 32.4 Gbps bandwidth deliver on my monitor?

The 32.4 Gbps (HBR3) link supports 8K at 60 Hz, 4K at 144 Hz or 240 Hz, 3440×1440 at 60 Hz and 2550×1440 at 60 Hz with HDR10 and DSC 1.2.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.