We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aomoproing 8K fiber optic DisplayPort cable 10m with male connectors

Aomoproing

Aomoproing 8K Fiber Optic DisplayPort Cable 10m

SKU CH-TQYR-4DQDR

Fiber-optic DisplayPort 1.4 cable carries 32.4 Gbps for 8K at 60 Hz or 4K at 240 Hz over 10 metres

Cable Length 33 Feet

  • 8K 7680×3840 at 60 Hz for ultra-sharp detail
  • 4K 3840×2160 at 240 Hz for fluid motion
  • 4 Gbps bandwidth via DisplayPort 1.4 HBR3
  • 10 m fiber-optic reach without signal loss
  • HDR10 and DSC 1.2 support for vivid colour depth

10-metre fibre-optic DisplayPort 1.4 cable

This 10-metre fibre-optic cable carries DisplayPort 1.4 signals up to 32.4 Gbps between a PC or laptop and a monitor, projector or HDTV. The hybrid copper-and-fibre construction maintains full bandwidth over the full 10-metre run without the signal loss typical of passive copper at this length.

8K 60 Hz and 4K 240 Hz headroom

The link supports 7680×3840 at 60 Hz, 3840×2160 at up to 240 Hz and 3440×1440 at 60 Hz with HBR3 and DSC 1.2 compression. At 8K 60 Hz the 32.4 Gbps ceiling is fully used, so higher refresh rates at that resolution are not possible; 4K 144 Hz or 240 Hz operation leaves bandwidth headroom for HDR10 metadata.

Male-to-male 20-pin connectors for in-wall runs

Each end terminates in a standard 20-pin male DisplayPort plug, allowing direct connection to graphics cards and display inputs without adapters. The slim fibre-optic jacket suits in-wall installation, while the tinned-copper auxiliary conductors carry the auxiliary channel and power for plug-and-play operation.

Highlights

  • 8K 7680×3840 at 60 Hz for ultra-sharp detail
  • 4K 3840×2160 at 240 Hz for fluid motion
  • 4 Gbps bandwidth via DisplayPort 1.4 HBR3
  • 10 m fiber-optic reach without signal loss
  • HDR10 and DSC 1.2 support for vivid colour depth

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 10m fiber-optic DisplayPort 1.4 cable drive an older 4K 60Hz monitor from a current graphics card?

Yes — the cable carries the full 32.4Gbps HBR3 link, so any DisplayPort 1.4 or earlier source will negotiate the monitor's native 4K 60Hz mode without signal loss.

How can I verify the cable is delivering 8K 60Hz or 4K 144Hz after installation?

Open the GPU control panel or monitor OSD and confirm the active resolution reads 7680x3840 at 60Hz or 3840x2160 at 144Hz with HDR10 enabled.

Does the package include only the male-to-male DisplayPort 20-pin cable or are adapters supplied?

The box contains the 10m fiber-optic cable with 20-pin male connectors on both ends; no adapters or extra accessories are included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.