We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Enfain RJ45 male-to-female extension cable 90° down angle 1.5 m 28AWG

Enfain

Enfain RJ45 male to female extension cable 90° down angle 1.5 m 28AWG

SKU CH-KE4T-93E4W

A 1.5 m RJ45 male-to-female extension cable with a 90° down-angle connector and screw-panel mount for secure installation

  • Length1.5 m

Style Down Angle

  • 5 m reach extends a network link without moving equipment
  • 90° down angle routes the cable tight against a panel or chassis
  • 28 AWG copper cores with foil shield carry the signal through the extension
  • Screw-mount flange secures the female port to an industrial case or commercial computer
  • Male-to-female design converts a fixed jack into a flexible connection point

Enfain RJ45 90° Down Angle Extension

This 1.5 m cable adds reach to an existing Ethernet run with a male-to-female layout. The fixed 90° down angle routes the jack away from tight panels or crowded rear I/O. A screw-mount flange secures the female end to a chassis or wall plate. Eight-core 28AWG conductors with aluminium foil shielding carry the signal.

Replacing a straight-through coupler

Use this when a straight connector blocks adjacent ports or presses against a side panel. The right-angle exit clears the obstruction without stressing the jack. It is worth the swap when the current cable cannot be rerouted or when a panel-mount female port is needed for a clean install.

Sustained signal integrity over the full length

The 28AWG copper cores and continuous foil shield maintain category performance across the 1.5 m run. The moulded strain relief and screw flange prevent micro-movement that degrades contact over time. The protective film ships intact and is removed before termination.

Highlights

  • 5 m reach extends a network link without moving equipment
  • 90° down angle routes the cable tight against a panel or chassis
  • 28 AWG copper cores with foil shield carry the signal through the extension
  • Screw-mount flange secures the female port to an industrial case or commercial computer
  • Male-to-female design converts a fixed jack into a flexible connection point

Specifications

Length1.5 m

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What panel cut-out size do the screw-mount ears on this 1.5 m Enfain cable need?

The screw-mount ears fit a standard RJ45 panel cut-out; use the two mounting holes on the female jack to secure it to your chassis or wall plate.

Which side of the 90° down-angle plug goes in first when routing the cable behind a rack?

Insert the straight female jack into the panel or device, then route the angled male plug downward so the 1.5 m cable runs parallel to the mounting surface.

How often should the 28AWG copper conductors and foil shield be inspected in an industrial cabinet?

Check the jacket and foil shield annually for abrasion or kinks; replace the cable if the conductors are exposed or the shield continuity is lost.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.