We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zoro Select Type 29 flap disc, 4 inch diameter, 60 grit, fiberglass backing

Zoro Select

Zoro Select Flap Disc Type 29 4 in 60 Grit

SKU CH-92QV-0HXKC

4-inch Type 29 flap disc with zirconia alumina abrasive, 60 grit and 15,300 RPM maximum speed

  • TypeSanding Abrasives
  • Size4.000
  • Type 29 angled flaps for aggressive stock removal
  • Zirconia alumina grain cuts fast on medium-grade work
  • 60 grit balances material removal with surface finish
  • 4 inch diameter fits compact angle grinders
  • 15,300 RPM maximum speed matches high-speed tools

Zoro Select Type 29 Flap Disc 4 Inch

This Zoro Select flap disc is a coated abrasive tool built for angle grinders with a 5/8 inch unthreaded arbor. It suits metal fabrication, weld blending and surface preparation where a medium-grade zirconia alumina abrasive is required. The Type 29 angled face gives aggressive stock removal on flat and contoured workpieces.

60 Grit Zirconia Alumina Capacity

The 60 grit zirconia alumina flaps deliver consistent cutting action on steel and stainless steel, maintaining material removal rate through the disc life. Medium density and X-weight fiberglass backing provide enough rigidity for heavy grinding while still conforming to curved surfaces. Maximum operating speed is 15,300 RPM, so the disc must only be used on grinders rated at or below that speed.

Fiberglass Backing and 5/8 Inch Arbor

The fiberglass backing plate absorbs vibration and resists heat buildup during extended grinding sessions. An unthreaded 5/8 inch centre hole fits directly onto standard angle-grinder spindles without additional adapters. Builders needing threaded hubs, finer finishing grits or larger diameter discs will need a different product.

Highlights

  • Type 29 angled flaps for aggressive stock removal
  • Zirconia alumina grain cuts fast on medium-grade work
  • 60 grit balances material removal with surface finish
  • 4 inch diameter fits compact angle grinders
  • 15,300 RPM maximum speed matches high-speed tools

Specifications

BrandZORO SELECT
TypeSanding Abrasives
Size4.000

Questions about this item

Will this 4 in Type 29 flap disc fit the 5/8 in arbor on my older angle grinder?

Yes, the unthreaded 5/8 in hole matches the standard arbor size on most 4 in grinders.

How can I confirm the disc is running true after mounting it?

Run the grinder at no load; the disc should spin without wobble up to the 15,300 RPM maximum speed.

Does the box include a backing pad or mounting nut, or must I buy them separately?

The disc has a built-in fiberglass backing plate, so no separate backing pad is needed; a compatible 5/8 in flange nut is required if your grinder does not already have one.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.