We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zoro Select Type 27 flap disc 4-1/2 inch 120 grit plastic backing

Zoro Select

Zoro Select Flap Disc Type 27 4-1/2" 120 Grit

SKU CH-WDCJ-0JPCK

A 4-1/2 inch Type 27 flap disc with 120 grit zirconia alumina for fine sanding and grinding at up to 13,300 RPM

  • TypeSanding Abrasives
  • Size4.700
  • Fine finish with 120 grit zirconia alumina
  • Type 27 flat profile suits flat surfaces
  • 4-1/2 inch diameter fits common grinders
  • 5/8-11 threaded hole for direct mounting
  • 13,300 RPM max speed for demanding jobs

Zoro Select Flap Disc Type 27 4-1/2" 120 Grit

The Zoro Select flap disc is a coated abrasive wheel built for right-angle grinders. It uses zirconia alumina grain on a plastic backing plate with a threaded 5/8 in.-11 centre hole. The disc is rated for a maximum speed of 13,300 rpm and carries a standard density rating. Trimmable flaps extend usable life during finishing work.

Suited for metal finishing

Fabricators blending weld seams or removing light scale on steel will find the fine 120 grit effective. The Type 27 flat profile keeps the abrasive face parallel to the workpiece. Operators who need aggressive stock removal on curved profiles or a coarser grit for heavy grinding should choose a different disc geometry.

Threaded 5/8 in.-11 centre hole fits common

The connector size matches the spindle thread on many 4-1/2 inch angle grinders. Verify your tool’s arbor specification before purchase. The plastic backing plate and trimmable flaps are designed for standard density applications up to the rated maximum speed.

Highlights

  • Fine finish with 120 grit zirconia alumina
  • Type 27 flat profile suits flat surfaces
  • 4-1/2 inch diameter fits common grinders
  • 5/8-11 threaded hole for direct mounting
  • 13,300 RPM max speed for demanding jobs

Specifications

BrandZORO SELECT
TypeSanding Abrasives
Size4.700

Questions about this item

Should I choose the 120 grit flap disc or a different grit for fine finishing?

The 120 grit rating provides a fine grade surface preparation suitable for blending and light material removal on metal workpieces.

What does the 13,300 RPM maximum speed mean when mounted on my angle grinder?

Your angle grinder must not exceed 13,300 RPM; operating above this limit can cause the disc to fail and create a safety hazard.

Will the 5/8 In. -11 threaded hole fit my grinder's spindle?

The 5/8 In. -11 threaded hole matches the standard spindle size on most 4-1/2 inch angle grinders for direct mounting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.