We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized alloy steel anchor shackle with blue removable bolt pin

Zoro Select

Zoro Select 8064305 Anchor Shackle 34000 lb conveying

SKU CH-NJ3Y-8ZZ5S

Anchor shackle rated for a 34,000 lb working load limit, built from galvanized alloy steel with a removable bolt-and-nut pin

  • 34,000 lb working load limit for heavy lifts
  • Alloy steel body and pin resist deformation
  • Galvanized silver finish protects against corrosion
  • Removable bolt and nut pin enables quick rigging
  • 3 3/8 in inside width fits wide slings

Anchor Shackle 34 000 lb working load

The Zoro Select 8064305 anchor shackle is built for heavy lifting, pulling and conveying tasks where a 34 000 lb working load limit is required. Its alloy steel body and galvanized finish suit industrial and construction environments demanding high strength and corrosion resistance.

Removable bolt and nut pin with blue finish

The pin uses a removable bolt and nut design made from alloy steel with a blue color for quick identification. This hardware allows the shackle to be opened and closed without special tools, while the galvanized body resists weathering during outdoor or marine use.

Check sling width and eye spacing before ordering

Verify that your sling width does not exceed 3 3/8 in and that the connection points accept a 2 3/8 in width between eyes. The pin diameter is 1 5/8 in and the inside length is 5 3/4 in, so the shackle must fit the intended attachment hardware and load geometry.

Highlights

  • 34,000 lb working load limit for heavy lifts
  • Alloy steel body and pin resist deformation
  • Galvanized silver finish protects against corrosion
  • Removable bolt and nut pin enables quick rigging
  • 3 3/8 in inside width fits wide slings

Specifications

BrandZORO SELECT

Questions about this item

How often should the galvanized alloy steel body and blue alloy steel pin be inspected for wear or corrosion before replacement?

Inspect the shackle before each use for deformation, cracks, or excessive corrosion on the galvanized body and blue pin; replace immediately if the pin diameter reduces below 1 5/8 in or the body shows permanent distortion.

What is the maximum sustained load the shackle can handle before the working load limit is reached?

The working load limit is 34,000 lb; sustained loads must not exceed this figure, as it represents the maximum safe capacity for lifting operations.

Does the galvanized finish and alloy steel construction prevent heat buildup or noise during continuous daily lifting?

The shackle has no moving parts that generate heat or noise; the galvanized alloy steel body and pin remain at ambient temperature and operate silently under load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.