Zoro Select
Zoro Select 60011 Manual 2-Way Brass Ball Valve
Manual two-way brass ball valve rated for air, gas and water up to 175 psi operating pressure
- Manual two-way brass ball valve controls air, gas or water flow
- Full-port design with brass ball gives unrestricted passage
- Lever handle provides quick quarter-turn shut-off
- Brass body rated 175 psi operating and 600 psi steam
- Complies with California Proposition 65 chemical disclosure requirements
Manual Brass Ball Valve for Air Gas Water
The Zoro Select 60011 is a new manual two-way ball valve with a brass body and full-port brass ball. It handles air, gas and water in a straight two-piece design with lever operation and 3/4-inch IPS connections on both sides. Maximum operating pressure is rated at 175 psi for general media and 600 psi for steam service.
Builders Needing Full-Port Brass Shutoff
This valve suits installers who need a simple quarter-turn shutoff for air, water or gas lines at moderate pressure. The full-port brass ball gives unrestricted flow through the 3/4-inch bore. It is not for systems requiring 3-A sanitary certification, combustible-gas ratings or automated actuation, and the supplier notes California Proposition 65 warnings for cancer and reproductive harm.
Capacity Handles 175 psi General 600 psi Steam
Comfortably handles air, water and gas lines up to 175 psi and steam lines up to 600 psi through the full-port brass bore. The two-piece brass construction and lever handle provide reliable manual control within those limits. It runs out at pressures above 175 psi for general media or above 600 psi for steam, and it does not carry a combustible-gas rating or 3-A sanitary compliance for specialised service.
Highlights
- Manual two-way brass ball valve controls air, gas or water flow
- Full-port design with brass ball gives unrestricted passage
- Lever handle provides quick quarter-turn shut-off
- Brass body rated 175 psi operating and 600 psi steam
- Complies with California Proposition 65 chemical disclosure requirements
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What pipe threads must my system have to connect this 3/4 in IPS brass valve?
The valve uses 3/4 in IPS threads on both ports, so your piping must match that thread size and standard for a proper seal.
Can the 175 psi operating pressure of this brass ball valve work with my existing 600 psi steam lines?
No, the valve is rated for 175 psi operating pressure and 600 psi steam pressure, so it is not suited for 600 psi operating steam service.
How can I verify the 60011 valve is sealing correctly after installation?
Pressurise the line up to 175 psi and check the lever handle for leaks at the stem and both threaded connections.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



