We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass two-way ball valve with lever handle

Zoro Select

Zoro Select 60009 Manual 2-Way Ball Valve

SKU CH-C7YV-RMREB

Manual two-way brass ball valve controls air, gas or water flow at up to 175 psi operating pressure and 600 psi steam pressure

  • Manual two-way flow control for air, gas and water
  • Brass body and ball handle 175 psi operating pressure
  • Full-port design maintains unrestricted flow
  • Lever handle allows quick open and close action
  • California Proposition 65 warning for chemical exposure

Valve purpose and audience

The Zoro Select 60009 is a manual two-way ball valve built for on-off control of air, gas or water lines. Its brass body and full-port brass ball suit general-purpose plumbing, workshop and light-industrial installations where quarter-turn shut-off is required.

Pressure ratings and media handling

The valve handles up to 175 psi operating pressure and 600 psi steam pressure with brass seals rated for the listed media. No combustible-gas rating is provided, so the valve should not be specified for fuel-gas service.

Connections and daily use

Both ends use a 1/2 in IPS straight connection, allowing direct threading into standard pipe or fittings. The lever handle gives clear visual indication of open or closed position during routine operation.

Highlights

  • Manual two-way flow control for air, gas and water
  • Brass body and ball handle 175 psi operating pressure
  • Full-port design maintains unrestricted flow
  • Lever handle allows quick open and close action
  • California Proposition 65 warning for chemical exposure

Specifications

BrandZORO SELECT

Questions about this item

How do I install the 1/2 in IPS brass ball valve and what step is often missed?

Thread the IPS ends onto matching pipe threads using sealant rated for the 175 psi operating pressure; the step often missed is confirming the sealant is compatible with brass and the intended media before pressurising.

What maintenance or replacement will the brass ball valve need later?

Inspect the lever handle and brass ball for wear or corrosion periodically; replace the valve if the seal material shows leakage or the handle becomes stiff under 175 psi service.

What limit shows up first under sustained use at the 175 psi operating pressure?

The 175 psi maximum operating pressure is the primary limit; sustained pressure at or near this rating can accelerate seal wear and reduce the valve's service life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.