Zoro Select
Zoro Select 5CYH9 Pink Poly Tubing 3in 1075ft 4mil
Pink anti-static poly tubing roll spans 1075 feet at 4 mil thickness for static-sensitive packaging
- TypeChisel
- Wide temperature range suits varied environments
- Anti-static property protects sensitive components
- 1075 ft roll length reduces changeover frequency
- 4 mil thickness balances strength and flexibility
- Pink colour enables quick visual identification
Poly Tubing 3in 1075ft 4mil
Zoro Select 5CYH9 pink poly tubing is a low-density polyethylene roll built for packaging, bundling and protective wrapping tasks. The 1,075-foot length on a cored roll suits high-volume operations in shipping, warehousing or light industrial environments.
Anti-static 4 mil LDPE roll
The 4 mil thickness resists punctures while staying flexible down to -60 degrees F and stable up to 180 degrees F. Anti-static properties reduce dust attraction and static discharge risk. The 3-inch width and 12-inch roll diameter fit standard dispensers, and the core diameter of 3 inches allows quick changeovers.
Replaces lighter gauge or non-anti-static films
When thinner bags tear under sharp edges or static builds up on sensitive components, this tubing upgrades protection without adding bulk. The jump is worth it for lines that need FDA-non-compliant clarity, wide temperature tolerance and a single 1,075-foot roll to minimise reloads.
Highlights
- Wide temperature range suits varied environments
- Anti-static property protects sensitive components
- 1075 ft roll length reduces changeover frequency
- 4 mil thickness balances strength and flexibility
- Pink colour enables quick visual identification
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Chisel |
Questions about this item
Does the 3 in width and 4 mil thickness cap the bag size for small components?
The tubing is 3 in wide with a 4 mil wall, so each bag you heat-seal can hold items up to roughly that width and the film resists punctures during handling.
What holder fits the 12 in roll diameter and 3 in core?
A standard cored-roll dispenser with a 3 in mandrel and at least 12 in clearance will support the roll without binding.
How do I heat-seal the LDPE tubing without melting it past the 180 °F limit?
Use an impulse sealer set below 180 °F; apply a short pulse, let the seal cool, then cut — overheating makes the film brittle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



