We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear poly tubing roll 24 in wide 2900 ft long 1.5 mil thick on 12 in core

Zoro Select

Zoro Select 5CRF4 Soldering 24 in 1.5 mil 2900 ft

SKU CH-VWAH-7RTXY

Clear 24 in wide poly tubing on a 12 in core delivers 2900 ft of 1.5 mil LDPE film rated from -60 to 180 Degrees F

  • TypeChisel
  • FDA-compliant poly tubing for food-safe packaging
  • 2900 ft continuous roll reduces changeover downtime
  • 24 in width covers large components in one pass
  • 5 mil LDPE withstands -60 °F to 180 °F
  • 12 in roll diameter fits standard dispensing equipment

Poly Tubing Roll

Zoro Select 5CRF4 is a clear low-density polyethylene tube supplied on a cored roll. It measures 24 inches wide and 1.5 mil thick, giving 2900 feet of continuous length. The roll diameter is 12 inches with a 3 inch core. It suits packaging operations that need FDA-compliant film for food-contact or general wrapping tasks.

Operating Temperature Range

The material withstands a minimum of -60 degrees F and a maximum of 180 degrees F. Within this span the tubing stays flexible and retains its seal integrity without becoming brittle or melting. No active cooling or heating is required during normal dispensing or heat-sealing steps.

Proposition 65 Notice

California Proposition 65 warnings apply because the product contains a chemical known to the state to cause cancer and birth defects or other reproductive harm. Buyers who require a film without listed substances should select an alternative material.

Highlights

  • FDA-compliant poly tubing for food-safe packaging
  • 2900 ft continuous roll reduces changeover downtime
  • 24 in width covers large components in one pass
  • 5 mil LDPE withstands -60 °F to 180 °F
  • 12 in roll diameter fits standard dispensing equipment

Specifications

BrandZORO SELECT
TypeChisel

Questions about this item

How do I mount the 12 in roll on a standard 3 in core holder?

Slide the roll onto the 3 in core holder and secure it so the 24 in wide tubing feeds straight without twisting.

When should I replace the tubing if it becomes brittle?

Replace it if the Low Density Polyethylene shows cracking or loss of flexibility after exposure beyond the -60 to 180 Degrees F range.

At what temperature does the material start to soften during continuous heat sealing?

The tubing softens near its maximum operating temperature of 180 Degrees F, so keep sealing equipment below that limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.