We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small brass ball valve with locking handle and female threaded ends

Zoro Select

Zoro Select 32H969 1/4" FNPT Brass Ball Valve

SKU CH-FWDA-9YQYG

A manual two-way brass ball valve for air, oil, steam and water rated to 600 psi operating pressure

  • Full-port design maximises flow capacity
  • Chrome-plated brass ball resists corrosion and wear
  • Locking handle prevents accidental operation changes
  • Rated for 600 psi air, oil and water service
  • Suitable for vacuum systems down to 29 in Hg

1/4" FNPT Brass Ball Valve

The Zoro Select 32H969 is a two-piece manual ball valve with a 1/4 inch FNPT connection. Its brass body and chrome-plated brass ball suit air, oil, steam and water lines. A locking handle helps prevent accidental operation. The valve is rated for 600 psi operating pressure and 150 psi steam pressure.

Suitable for general inline shut-off

This valve suits installers who need a full-port, straight-body valve for moderate-pressure systems up to 600 psi. Buyers who need 3-A sanitary compliance, combustible-gas ratings or a vacuum rating beyond 29 in Hg should look at other models. The two-piece construction also limits field repairability compared with three-piece designs.

Capacity and headroom

The full-port ball maintains flow with minimal restriction at the rated 600 psi operating pressure. Steam service is limited to 150 psi. Vacuum service holds to 29 in Hg. California Proposition 65 warnings apply for cancer and reproductive-harm chemicals present in the materials.

Highlights

  • Full-port design maximises flow capacity
  • Chrome-plated brass ball resists corrosion and wear
  • Locking handle prevents accidental operation changes
  • Rated for 600 psi air, oil and water service
  • Suitable for vacuum systems down to 29 in Hg

Specifications

BrandZORO SELECT

Questions about this item

What thread size must my air line or fitting have to connect to this 1/4" FNPT valve?

You need a male 1/4" NPT thread on the hose, pipe or adapter so it screws into the female ports on the valve body.

Will the 600 psi rating handle the pressure from my existing compressor that runs at 150 psi?

Yes, the valve's maximum operating pressure is 600 psi, well above a typical 150 psi compressor output.

How can I verify the full-port ball is opening completely after installation?

Turn the locking handle a full quarter turn until it stops; the handle position then shows the bore is fully aligned with the flow path.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.