We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zoro Select twine bucket 1/16 inch diameter 6000 feet length 40 lb working load

Zoro Select

Zoro Select 18822 Twine 1/16 in Dia 6000 ft 40 lb

SKU CH-6P16-SMJNC

Twisted polypropylene twine, 1/16 in diameter, 6,000 ft length, 40 lb working load limit

  • 6,000 ft continuous length reduces reload downtime
  • 1/16 in diameter fits tight guides and pulleys
  • 40 lb working load limit handles light securing tasks
  • 189 lbf breaking strength provides reliable safety margin
  • Polypropylene core resists moisture and rot

Twine 1/16 in Diameter 6000 ft Length

This Zoro Select twine provides a 6,000-foot length of 1/16-inch diameter polypropylene rope in a bucket format. It is designed for pulling and conveying tasks where a lightweight, hollow-core line is required. The single-strand twisted construction suits general-purpose tying and securing applications.

Working Load Limit 40 lb Breaking Strength 189 lbf

The working load limit is 40 pounds, while the minimum breaking strength is 189 lbf, so the line must not be loaded beyond the lower figure during use. Elongation data at 10 percent of breaking strength and at 300 pounds is not applicable for this product. It is explicitly rated as not for lifting, so it cannot support suspended loads.

Check Lifting Restriction and Diameter Compatibility

Verify that your application does not involve lifting, as this twine lacks a lifting capability rating and is restricted to pulling or conveying only. Confirm that 1/16-inch diameter and a plain end type are compatible with your existing hardware, blocks, or cleats before ordering.

Highlights

  • 6,000 ft continuous length reduces reload downtime
  • 1/16 in diameter fits tight guides and pulleys
  • 40 lb working load limit handles light securing tasks
  • 189 lbf breaking strength provides reliable safety margin
  • Polypropylene core resists moisture and rot

Specifications

BrandZORO SELECT

Questions about this item

Should I pick the 1/16 in diameter or a thicker twine for a 40 lb working load?

The 1/16 in diameter twine is rated for a 40 lb working load limit and a 189 lbf breaking strength, so it matches that requirement directly.

What does the 189 lbf breaking strength mean when I am actually using the twine?

It is the maximum force the twine can take before it snaps; the safe working load is set at 40 lb, well below that peak figure.

The twisted polypropylene construction has no cover — does that limit what I can tie or secure?

The hollow-core twisted design with a plain end is intended for general tying and bundling, not for lifting, so it suits light-duty fastening tasks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.