We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red angular contact ball bearing 65x140x33mm in box

ZIBOO

ZIBOO NTN 7313 Angular Contact Ball Bearing 65x140x33mm Red

SKU CH-NDQM-3KPFR

Angular contact ball bearing measuring 65x140x33mm for precision rotary applications

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • Angular contact design handles combined radial and axial loads
  • 65 mm bore fits standard 65 mm shaft seats
  • 140 mm outer diameter matches common housing bores
  • 33 mm width provides high load capacity in compact space
  • NTN 7313 precision manufacturing ensures consistent performance

Industrial angular-contact bearing

The ZIBOO NTN 7313 is a precision angular-contact ball bearing built for electricians and maintenance technicians who need reliable rotational performance in test equipment and power-tool applications. Its 65x140x33mm dimensions suit shafts and housings that match this envelope, and the red finish provides quick visual identification in a busy workshop. The single-unit pack keeps inventory simple for targeted replacements.

Low-friction operation with minimal heat

Angular-contact geometry handles combined radial and axial loads while generating little friction, so running temperatures stay low during continuous use in motor spindles or test rigs. The design runs quietly, reducing audible distraction when equipment operates near workstations. Efficient load distribution also limits power loss, helping driven tools maintain their rated output without extra thermal load.

Fits standard 65 mm bore housings

The 65 mm bore seats directly on shafts of that size, while the 140 mm outside diameter matches common housing bores for this bearing series. A 33 mm width leaves room for standard circlips or locknuts without requiring special spacers. No additional lubrication fittings are needed beyond normal maintenance schedules, freeing up design space around the mounting area.

Highlights

  • Angular contact design handles combined radial and axial loads
  • 65 mm bore fits standard 65 mm shaft seats
  • 140 mm outer diameter matches common housing bores
  • 33 mm width provides high load capacity in compact space
  • NTN 7313 precision manufacturing ensures consistent performance

Specifications

BrandZIBOO
ModelNTN 7313
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

How do I install the 7313 bearing with its 65mm bore and 140mm outer diameter without damaging the 33mm width?

Press the inner ring onto a 65mm shaft and the outer ring into a 140mm housing using a sleeve that contacts only the ring being driven; never hammer directly on the 33mm wide races or the red finish.

What maintenance will the NTN 7313 angular contact ball bearing need after installation?

Relubricate at intervals suited to speed and load; inspect the red finish for fretting and replace the bearing if axial play exceeds the manufacturer's limit for the 7313 series.

Which limit appears first on the 7313 bearing during sustained high-speed operation?

The contact-angle design reaches its permissible speed limit before the 33mm wide races overheat, so monitor temperature rise at the 65mm bore and 140mm OD to stay within the NTN 7313 rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.