ZIBOO
ZIBOO NTN 7212C Angular Contact Ball Bearing 60x110x22mm
Angular contact ball bearing sized 60 by 110 by 22 millimetres for combined radial and axial loads
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Precision angular contact design handles combined radial and axial loads
- 60 mm bore fits standard shaft sizes in electrician tooling
- 110 mm outer diameter provides stable mounting in compact housings
- 22 mm width allows integration into tight assemblies
- NTN 7212C designation ensures correct replacement identification
Angular Contact Bearing 60x110x22mm
The ZIBOO NTN 7212C is a precision angular contact ball bearing designed for electrician tools and test equipment. Its 60 mm bore, 110 mm outer diameter and 22 mm width suit radial and axial load combinations in rotating assemblies.
Practical limits of angular contact design
The contact angle supports combined radial and thrust loads in one direction, so paired or opposed mounting is required for reversing axial forces. Speed capability and temperature range depend on the specific lubrication and cage fitted by NTN.
Bore diameter decides fit
A 60 mm bore determines shaft compatibility; verify the shaft tolerance and housing seat before installation to ensure the bearing is the correct part for your application.
Highlights
- Precision angular contact design handles combined radial and axial loads
- 60 mm bore fits standard shaft sizes in electrician tooling
- 110 mm outer diameter provides stable mounting in compact housings
- 22 mm width allows integration into tight assemblies
- NTN 7212C designation ensures correct replacement identification
Specifications
| Brand | ZIBOO |
|---|---|
| Model | NTN 7212C |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What does the 7212C designation tell me about which bearing to choose?
The 7212C is the specific model code for this angular contact ball bearing; it identifies the exact internal geometry and dimensions so you can match it to the required specification.
What do the 60x110x22mm dimensions mean once the bearing is in the machine?
They give the 60 mm bore, 110 mm outer diameter and 22 mm width, defining the shaft fit, housing fit and axial space the bearing will occupy when installed.
Which interface or standard applies to the NTN 7212C and what does it cap in practice?
The bearing follows standard angular contact ball bearing dimensions, so it fits any housing and shaft machined to the same 60 mm bore, 110 mm OD and 22 mm width tolerances.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00213107BTC
In stock