We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red self-aligning ball bearing 75x130x31mm in box

ZIBOO

ZIBOO NTN 2215 Self Aligning Ball Bearing 75x130x31mm

SKU CH-NZ9H-Z97P3

Self-aligning ball bearing with cylindrical bore measuring 75x130x31mm for radial load compensation

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • Self-aligning design compensates for shaft misalignment automatically
  • Cylindrical bore fits directly onto 75 mm shafts without adapters
  • NTN 2215 precision engineering ensures smooth rotation under load
  • 31 mm width provides high load capacity in compact housing
  • 130 mm outer diameter suits standard industrial mounting patterns

NTN 2215 Self-Aligning Bearing

The ZIBOO NTN 2215 is a self-aligning ball bearing with a cylindrical bore designed for rotating machinery. It suits maintenance engineers and electricians who need to replace worn units in motors, pumps or gearboxes where shaft misalignment occurs.

Installation notes

The bearing has a straight cylindrical bore that slides onto a shaft and is secured with a lock nut or adapter sleeve. Correct mounting force and clean seating surfaces prevent premature failure; hammer blows on the rings or dirty shafts are the usual causes of early noise and overheating.

75 × 130 × 31 mm envelope

The bore diameter is 75 mm, the outside diameter is 130 mm and the width is 31 mm. These three dimensions decide whether the bearing fits the housing and shaft in your application.

Highlights

  • Self-aligning design compensates for shaft misalignment automatically
  • Cylindrical bore fits directly onto 75 mm shafts without adapters
  • NTN 2215 precision engineering ensures smooth rotation under load
  • 31 mm width provides high load capacity in compact housing
  • 130 mm outer diameter suits standard industrial mounting patterns

Specifications

BrandZIBOO
ModelNTN 2215
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

How do I confirm the NTN 2215 bearing is seated correctly after installation?

The bearing should rotate smoothly by hand without binding or excessive play. Check that the 75 mm inner bore fits the shaft and the 130 mm outer diameter seats fully in the housing.

What comes in the box and do I need to buy anything else for the NTN 2215?

The box contains one NTN 2215 self-aligning ball bearing with cylindrical bore measuring 75x130x31 mm. No additional parts are included; you may need suitable lubricant and installation tools separately.

Which version of the NTN 2215 should I choose for my application?

The NTN 2215 is supplied as a single cylindrical-bore bearing with 75 mm bore, 130 mm outer diameter and 31 mm width. Select this version when those exact dimensions match your shaft and housing requirements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.