We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red single-row angular contact ball bearing 12x32x10 mm

ZIBOO

ZIBOO 7201 BEP Angular Contact Ball Bearings 12x32x10 mm

SKU CH-SBKM-7TYYH MPN 7201

Single-row angular contact ball bearing measuring 12x32x10 mm for precision rotation

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • Single-row design handles combined radial and axial loads
  • 12 mm bore fits standard 12 mm shafts precisely
  • 32 mm outer diameter matches common housing dimensions
  • 10 mm width allows compact installation in tight spaces
  • 7201 BEP designation identifies exact SKF specification

Precision Angular Contact Bearing

The ZIBOO 7201 BEP is a single-row angular contact ball bearing measuring 12x32x10 mm. It is built for electricians and technicians who need precise rotational accuracy in test equipment and power-tool assemblies. The red finish helps quick identification in a busy workshop.

Suited for radial-axial combined loads

This bearing suits applications where both radial and axial forces act simultaneously in one direction. It is not for pure high-speed radial-only duties where a deep-groove type would run cooler. Builders needing double-row capacity or sealed variants should look elsewhere.

One bearing per box

Each box contains a single 7201 BEP unit ready for immediate fitting. The pack includes no extra seals, spacers or lubricant, so installers must supply their own mounting paste and circlips. A three-year parts and one-year labour cover backs the component.

Highlights

  • Single-row design handles combined radial and axial loads
  • 12 mm bore fits standard 12 mm shafts precisely
  • 32 mm outer diameter matches common housing dimensions
  • 10 mm width allows compact installation in tight spaces
  • 7201 BEP designation identifies exact SKF specification

Specifications

BrandZIBOO
Model7201 BEP
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

What shaft diameter is required for the 12 mm bore of this 7201 BEP bearing?

The bearing has a 12 mm bore, so it fits a 12 mm shaft. The outer diameter is 32 mm and the width is 10 mm.

Can this single-row angular contact bearing replace a double-row bearing in the same 12x32x10 mm envelope?

No. A single-row 7201 BEP carries load in one direction only, while a double-row unit handles combined loads in both directions within the same 12x32x10 mm boundary dimensions.

How do I confirm the 7201 BEP is seated correctly after pressing it onto the 12 mm shaft?

Rotate the inner ring by hand; it should turn smoothly without binding. The red finish on the bearing should sit flush against the shaft shoulder with no visible gap.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.