Yescom USA, Inc.
Yescom 12" Earth Auger Bit 31.5" Depth 3/4" Shaft Black
A 12-inch cast-steel auger bit drills holes up to 31.5 inches deep in most soils using a 3/4-inch shaft
- Selling UnitEach
- TypeIndustrial
- FeaturesDown Lighting
- FinishBlack
- Fits 3/4" shaft post-hole diggers for quick setup
- 12" diameter cuts wide holes for bulbs and fence posts
- 5" depth reaches below frost line in one pass
- Cast steel pilot bit with black finish resists rust and corrosion
- Spiral blade leaves soil around hole edge for easy backfill
12-inch Earth Auger Bit
This 12-inch earth auger bit fits hand-held post-hole diggers with a 3/4-inch shaft. It is designed for landscaping tasks such as planting bulbs, potted plants, vegetables, flowers and shrubs. The tool also suits fence installation projects including wooden decorative fences and chain link fences. It is intended for users who need to dig uniform holes in a variety of soil conditions.
Depth and width limits in mixed soils
The bit digs holes up to 31.5 inches deep and 12 inches wide in most soil types including silty, peaty, gravel, pebble and dry cracked ground. Performance will vary with soil density, moisture and the presence of large rocks or roots that exceed the cutting diameter. The subulate tip and spiral blade are shaped to penetrate quickly, but extremely compacted or rocky terrain may reduce effective depth. Buyers who need to bore beyond 31.5 inches or wider than 12 inches cannot use this bit for those dimensions.
Simple shaft mounting with safety notes
The bit mounts directly onto a compatible powerhead with a 3/4-inch shaft, requiring no extra adapters or tools for attachment. Weighing 11.7 pounds, it is manageable for one operator but adds noticeable mass to the drill head during extended use. The cast steel pilot bit with glossy painted finish resists rust and corrosion, though the coating can chip if struck against hard obstacles. Users who lack a 3/4-inch shaft powerhead or who need to drill in solid rock will find this bit unsuitable.
Highlights
- Fits 3/4" shaft post-hole diggers for quick setup
- 12" diameter cuts wide holes for bulbs and fence posts
- 5" depth reaches below frost line in one pass
- Cast steel pilot bit with black finish resists rust and corrosion
- Spiral blade leaves soil around hole edge for easy backfill
Specifications
| Brand | Yescom |
|---|---|
| Selling Unit | Each |
| Type | Industrial |
| Features | Down Lighting |
| Finish | Black |
| Part Number | 08ADB005-12IN-06 |
Questions about this item
Which shaft size does this 12-inch auger bit require?
It fits hand-held post-hole diggers with a 3/4-inch shaft, such as the YES0617 powerhead.
What hole depth and width can the 12-inch bit achieve in typical soil?
It digs holes up to 31.5 inches deep and 12 inches wide in silty, peaty, gravel or dry cracked ground.
How does the 3/4-inch shaft connection affect compatibility with other powerheads?
The bit only mounts on diggers that accept a 3/4-inch shaft; it will not fit larger or smaller shaft sizes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



