We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 4 SATA to 4 SATA cable with braided mesh, 3.28 ft

YEPLOOK

YEPLOOK 4 SATA to 4 SATA SAS Cable 3.28 ft Blue

SKU CH-737Y-B4PZC

Connects four SATA drives at 6 Gbps over a 3.28 ft blue cable with hot-swap support

  • ColorBlue

Cable Length 3.28 Feet

  • Connect four drives with one 3.28 ft cable
  • 6 Gbps SATA 3.0 speed for fast transfers
  • Hot-swap support lets you change drives live
  • Nylon braid keeps wiring tidy and ventilated
  • 7-pin SAS connectors fit server backplanes directly

Server storage cable

This YEPLOOK cable links four SATA drives to a single SAS controller using a 3.28 ft blue assembly rated for SATA 3.0 6Gbps. It targets administrators who need a tidy, hot-swappable connection for multi-drive servers or workstations without adding extra host ports.

Braided build and straight heads

High-quality nylon braided mesh keeps the four 7-pin channels neat and ventilated inside crowded chassis. Symmetrical straight connectors with locking shrapnel snap in securely and support plug-and-play hot swap so drives can be exchanged without powering down the system.

Signal integrity at speed

The 6Gbps design maintains full SATA 3 throughput for 10,000 rpm hard drives or SSDs across the 3.28 ft run. Passive construction draws no extra power and adds no active cooling noise, leaving thermal and acoustic profile unchanged from the drives themselves.

Highlights

  • Connect four drives with one 3.28 ft cable
  • 6 Gbps SATA 3.0 speed for fast transfers
  • Hot-swap support lets you change drives live
  • Nylon braid keeps wiring tidy and ventilated
  • 7-pin SAS connectors fit server backplanes directly

Specifications

Model4 SATA TO 4 SATA
ColorBlue

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What data rate does the SATA 3.0 interface on this cable support?

The cable is rated for SATA 3.0 at 6Gbps, which is the maximum throughput of the SATA 3.0 standard.

What connector type and cable length are needed to fit four drives?

It uses four straight 7-pin SATA connectors on each end and measures 3.28 ft (1 m) end to end.

How do I install the cable and which step is often missed?

Align each 7-pin plug with the port's L-shaped key, press straight in until the metal retention clip clicks, and repeat for all four connectors; the step often missed is verifying every clip has latched.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.